[Wed Jun 20 18:33:33 2012] Detection parameters:
  Position = (288.2, 118.4) = 13 22 20.43 -16 54 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.8 +/- 15.8
  Background counts = 68.3
  Rate = 0.0009 +/- 0.0002

[Wed Jun 20 18:33:34 2012] Off-axis axis estimate = 13.07'
[Wed Jun 20 20:14:49 2012] Using EEF radius (= 12.97 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 20:14:49 2012] Initial guess for spatial extent in simple fitting = 12.97"
[Wed Jun 20 20:14:49 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.011
[Wed Jun 20 20:14:49 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 12.97"
[Wed Jun 20 21:17:40 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src40.ximg exists
[Wed Jun 20 21:17:40 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src40_1.ximg exists
[Wed Jun 20 21:17:40 2012] Fit fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src40 appears to have run properly
[Wed Jun 20 21:17:40 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Wed Jun 20 21:17:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Wed Jun 20 21:17:40 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Wed Jun 20 21:17:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Wed Jun 20 21:17:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 22:24:04 2012] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 16.278514 pixels away
[Wed Jun 20 22:24:04 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 22:24:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 22:24:04 2012] Assessing source extent using major
[Wed Jun 20 22:24:04 2012] Source does appear to be extended
[Wed Jun 20 22:24:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 00:02:20 2012] Using EEF radius (= 12.97 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 00:02:20 2012] Initial guess for spatial extent in simple fitting = 12.97"
[Thu Jun 21 00:02:20 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.011
[Thu Jun 21 00:02:20 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 12.97"
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src37.ximg exists
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu Jun 21 00:56:38 2012] Fit fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src37 appears to have run properly
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu Jun 21 00:56:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu Jun 21 00:56:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu Jun 21 00:56:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 01:56:00 2012] Spatial fit model total counts = 700.937000, observed total counts = 638.000000
[Thu Jun 21 01:56:00 2012] Offset between fit and detection position for source 11 = 0.761931 pixels
[Thu Jun 21 01:56:00 2012] 705.744200 total counts/ 625.041000 bgd. counts: snr = 3.228022
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.761931 pixels
  Position = (288.8, 118.8) = 13 22 20.24 -16 54 7.9
  Extent = 11.5 (7.9-16.2)" x 4.3 (3.2-6.6)", rotation angle = 351 (338-0) degrees
  Source counts = 80.7 +/- 26.6
  Background counts = 625.0
  Rate = 0.0009 +/- 0.0003
[Thu Jun 21 01:56:00 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 01:56:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 01:56:00 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 01:56:00 2012] Source does appear to be extended
[Thu Jun 21 01:56:00 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.20
[Thu Jun 21 05:08:24 2012] XMMSAS src. selection expression = ellipse(25080.004800, 10290.076840, 691.746020, 256.633207, 351.182361, X, Y)
[Thu Jun 21 05:08:24 2012] Writing source region out to fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src11_src.reg
[Thu Jun 21 05:08:24 2012] Extracting stamp from image fullrun_mos1_xmm0506340101_pi300-10000_cl_sm2.00.img.gz, (249, 79) - (329, 159)
[Thu Jun 21 05:08:24 2012] XMMSAS bgd. selection expression = annulus(25080.004800, 10290.076840, 1152.910033, 2305.820066, X, Y)
[Thu Jun 21 05:08:24 2012] Writing fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src11.gif
[Thu Jun 21 05:21:42 2012] Mean detx,y = (12634.90, 5547.85) 
[Thu Jun 21 05:21:43 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 05:22:05 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 05:22:05 2012] Setting source spectrum file to fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 21 05:22:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Jun 21 05:46:28 2012] Not generating rmf since there are only 80 counts
[Thu Jun 21 05:46:28 2012] rmf not generated due to insufficient counts
[Thu Jun 21 06:32:56 2012] Updating aperture counts using extracted products
[Thu Jun 21 06:32:56 2012] Error reading totcts from fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 21 06:32:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 06:32:57 2012] Using photon index=1.80, rate=0.000945, arf fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src11.arf
[Thu Jun 21 06:32:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 06:32:57 2012] Updating source flux to 2.3e-14
[Thu Jun 21 06:33:00 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting