[Wed Jun 20 18:33:33 2012] Detection parameters:
  Position = (392.7, 375.8) = 13 21 48.82 -16 35 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 839.0 +/- 37.0
  Background counts = 58.4
  Rate = 0.009 +/- 0.0004

[Wed Jun 20 18:33:34 2012] Off-axis axis estimate = 8.84'
[Wed Jun 20 20:14:49 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 20:14:49 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Wed Jun 20 20:14:49 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.004
[Wed Jun 20 20:14:49 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.85"
[Wed Jun 20 21:17:39 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jun 20 21:17:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src5.csv
[Wed Jun 20 21:17:39 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jun 20 21:17:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src5.csv
[Wed Jun 20 21:17:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 21:17:40 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jun 20 21:17:40 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jun 20 21:17:40 2012] Fit fullrun_mos1_xmm0506340101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jun 20 22:24:04 2012] Warning, spatial fit 5 centroid is now closest to src. 13
[Wed Jun 20 22:24:04 2012] Source 10 is offset by 7.404788 and 3.538943 pixels which is larger than
2 X fitted extent = 1.156837 x 1.156837, not incorporating fit results
[Wed Jun 20 22:24:04 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 22:24:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 22:24:04 2012] Assessing source extent using major
[Wed Jun 20 22:24:04 2012] Source does appear to be extended
[Wed Jun 20 22:24:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 00:02:20 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 00:02:20 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Thu Jun 21 00:02:20 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.004
[Thu Jun 21 00:02:20 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.85"
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jun 21 00:56:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src5.csv
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jun 21 00:56:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src5.csv
[Thu Jun 21 00:56:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jun 21 00:56:38 2012] fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jun 21 00:56:38 2012] Fit fullrun_mos1_xmm0506340101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jun 21 01:56:00 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.538780 pixels away
[Thu Jun 21 01:56:00 2012] Source 10 is offset by 7.404788 and 3.538943 pixels which is larger than
2 X fitted extent = 1.156837 x 1.156837, not incorporating fit results
[Thu Jun 21 01:56:00 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 01:56:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 01:56:00 2012] Assessing source extent using major
[Thu Jun 21 01:56:00 2012] Source does appear to be extended
[Thu Jun 21 01:56:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 05:08:24 2012] XMMSAS src. selection expression = ellipse(34112.872528, 32645.544037, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 05:08:24 2012] Writing source region out to fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src10_src.reg
[Thu Jun 21 05:08:24 2012] Extracting stamp from image fullrun_mos1_xmm0506340101_pi300-10000_cl_sm2.00.img.gz, (355, 338) - (430, 413)
[Thu Jun 21 05:08:24 2012] XMMSAS bgd. selection expression = annulus(34112.872528, 32645.544037, 1087.500000, 2175.000000, X, Y) && !ellipse(32825.111633, 30766.516083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32666.186890, 31444.838898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34973.648956, 34507.001007, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 21 05:08:24 2012] Writing fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src10.gif
[Thu Jun 21 05:11:48 2012] Mean detx,y = (-4344.33, -11520.59) 
[Thu Jun 21 05:11:49 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 05:11:58 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 05:11:58 2012] Setting source spectrum file to fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jun 21 05:11:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Jun 21 05:31:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 21 05:31:51 2012] rmf not generated due to insufficient counts
[Thu Jun 21 06:32:56 2012] Updating aperture counts using extracted products
[Thu Jun 21 06:32:56 2012] Error reading totcts from fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jun 21 06:32:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 06:32:56 2012] Using photon index=1.80, rate=0.00936, arf fullrun_mos1_xmm0506340101_pi300-10000_pass1_cl_src10.arf
[Thu Jun 21 06:32:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 06:32:56 2012] Updating source flux to 2.1e-13
[Thu Jun 21 06:33:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting