[Fri Aug 31 13:07:24 2012] Detection parameters:
  Position = (202.0, 110.2) = 17 45 29.98 -29 7 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 198.5 +/- 20.9
  Background counts = 65.3
  Rate = 0.005 +/- 0.0005

[Fri Aug 31 13:07:24 2012] Off-axis axis estimate = 15.33'
[Fri Aug 31 14:53:33 2012] Using EEF radius (= 14.09 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 14:53:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 31 14:53:33 2012] Initial guess for spatial extent in simple fitting = 14.09"
[Fri Aug 31 14:53:33 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.001
[Fri Aug 31 14:53:33 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 14.09"
[Fri Aug 31 17:00:29 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src26.ximg exists
[Fri Aug 31 17:00:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src26.csv
[Fri Aug 31 17:00:29 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src26_1.ximg exists
[Fri Aug 31 17:00:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src26.csv
[Fri Aug 31 17:00:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 17:00:30 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Fri Aug 31 17:00:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Aug 31 17:00:30 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Fri Aug 31 17:00:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Aug 31 17:00:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 17:00:47 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 18.130753 pixels away
[Fri Aug 31 17:00:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:00:48 2012] Assessing source extent using major
[Fri Aug 31 17:00:48 2012] Source does appear to be extended
[Fri Aug 31 17:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 19:18:11 2012] Using EEF radius (= 14.09 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 19:18:11 2012] Initial guess for spatial extent in simple fitting = 14.09"
[Fri Aug 31 19:18:11 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.001
[Fri Aug 31 19:18:11 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 14.09"
[Fri Aug 31 21:51:27 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_src22.ximg exists
[Fri Aug 31 21:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_src22.csv
[Fri Aug 31 21:51:27 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri Aug 31 21:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_src22.csv
[Fri Aug 31 21:51:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 21:51:27 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri Aug 31 21:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri Aug 31 21:51:27 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Aug 31 21:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri Aug 31 21:51:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 21:51:36 2012] Spatial fit model total counts = 700.674000, observed total counts = 592.000000
[Fri Aug 31 21:51:36 2012] Poor agreement between spatial fit and data for source 50
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 31 21:51:36 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:51:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:51:36 2012] Assessing source extent using major
[Fri Aug 31 21:51:36 2012] Source does appear to be extended
[Fri Aug 31 21:51:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 22:06:07 2012] XMMSAS src. selection expression = ellipse(17529.716187, 9542.576950, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 31 22:06:07 2012] Writing source region out to fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src50_src.reg
[Fri Aug 31 22:06:07 2012] Extracting stamp from image fullrun_mos2_xmm0506291201_pi300-10000_cl_sm2.00.img.gz, (165, 73) - (240, 148)
[Fri Aug 31 22:06:07 2012] XMMSAS bgd. selection expression = annulus(17529.716187, 9542.576950, 1087.500000, 2175.000000, X, Y)
[Fri Aug 31 22:06:07 2012] Writing fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src50.gif
[Fri Aug 31 22:18:23 2012] Mean detx,y = (-6982.21, 14811.39) 
[Fri Aug 31 22:18:24 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 22:18:34 2012] grppha failed
[Fri Aug 31 22:18:34 2012] Setting source spectrum file to fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src50_src.pi.gz
[Fri Aug 31 22:18:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Fri Aug 31 22:18:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 31 22:18:56 2012] rmf not generated due to insufficient counts
[Fri Aug 31 22:19:22 2012] Updating aperture counts using extracted products
[Fri Aug 31 22:19:23 2012] Error reading totcts from fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src50_src.pi.gz
[Fri Aug 31 22:19:23 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 22:19:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 22:19:25 2012] xmm0506291201/analysis//spectral/fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete