[Fri Aug 31 13:07:24 2012] Detection parameters:
  Position = (275.4, 272.1) = 17 45 5.61 -28 55 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 474.1 +/- 34.0
  Background counts = 113.4
  Rate = 0.01 +/- 0.001

[Fri Aug 31 13:07:24 2012] Off-axis axis estimate = 2.53'
[Fri Aug 31 14:53:33 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 14:53:33 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Fri Aug 31 14:53:33 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.777
[Fri Aug 31 14:53:33 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.70"
[Fri Aug 31 17:00:28 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src9.ximg exists
[Fri Aug 31 17:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src9.csv
[Fri Aug 31 17:00:29 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Aug 31 17:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src9.csv
[Fri Aug 31 17:00:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 17:00:29 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Aug 31 17:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Fri Aug 31 17:00:29 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Aug 31 17:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Fri Aug 31 17:00:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 17:00:47 2012] Warning, spatial fit 9 centroid is now closest to src. 7
[Fri Aug 31 17:00:47 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:00:47 2012] Assessing source extent using major
[Fri Aug 31 17:00:47 2012] Source does appear to be extended
[Fri Aug 31 17:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 17:00:48 2012] Source is confused with source 30
[Fri Aug 31 19:18:11 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 19:18:11 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Fri Aug 31 19:18:11 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.777
[Fri Aug 31 19:18:11 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.70"
[Fri Aug 31 21:51:26 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_src9.ximg exists
[Fri Aug 31 21:51:26 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Aug 31 21:51:27 2012] Fit fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_src9 appears to have run properly
[Fri Aug 31 21:51:27 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Aug 31 21:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Aug 31 21:51:27 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Aug 31 21:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Aug 31 21:51:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 21:51:36 2012] Warning, spatial fit 9 centroid is now closest to src. 30
[Fri Aug 31 21:51:36 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:51:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:51:36 2012] Assessing source extent using major
[Fri Aug 31 21:51:36 2012] Source does appear to be extended
[Fri Aug 31 21:51:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 22:06:07 2012] XMMSAS src. selection expression = ellipse(23914.551880, 23625.477600, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 31 22:06:07 2012] Writing source region out to fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src37_src.reg
[Fri Aug 31 22:06:07 2012] Extracting stamp from image fullrun_mos2_xmm0506291201_pi300-10000_cl_sm2.00.img.gz, (238, 235) - (313, 310)
[Fri Aug 31 22:06:07 2012] XMMSAS bgd. selection expression = annulus(23914.551880, 23625.477600, 1087.500000, 2175.000000, X, Y) && !ellipse(24754.051960, 24245.492200, 1475.464842, 1170.600034, 254.646000, X, Y) && !ellipse(25243.834600, 24233.575800, 433.242412, 433.242412, 0.000000, X, Y) && !ellipse(23760.145996, 24480.866974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23917.921112, 24062.617554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23958.397034, 25522.089813, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 22:06:07 2012] Writing fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src37.gif
[Fri Aug 31 22:16:31 2012] Mean detx,y = (-645.89, 577.06) 
[Fri Aug 31 22:16:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 22:16:37 2012] grppha failed
[Fri Aug 31 22:16:37 2012] Setting source spectrum file to fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src37_src.pi.gz
[Fri Aug 31 22:16:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Fri Aug 31 22:18:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 31 22:18:55 2012] rmf not generated due to insufficient counts
[Fri Aug 31 22:19:22 2012] Updating aperture counts using extracted products
[Fri Aug 31 22:19:22 2012] Error reading totcts from fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src37_src.pi.gz
[Fri Aug 31 22:19:23 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 22:19:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 22:19:25 2012] xmm0506291201/analysis//spectral/fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete