[Fri Aug 31 13:07:23 2012] Detection parameters:
  Position = (285.3, 279.1) = 17 45 2.35 -28 54 49.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55466.8 +/- 278.5
  Background counts = 110.7
  Rate = 2 +/- 0.008

[Fri Aug 31 13:07:24 2012] Off-axis axis estimate = 1.69'
[Fri Aug 31 14:53:33 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 14:53:33 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Aug 31 14:53:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Fri Aug 31 14:53:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Aug 31 17:00:28 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 31 17:00:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src1.csv
[Fri Aug 31 17:00:28 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 31 17:00:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src1.csv
[Fri Aug 31 17:00:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 17:00:29 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 31 17:00:29 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 31 17:00:29 2012] Fit fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 31 17:00:47 2012] Spatial fit model total counts = 54588.900000, observed total counts = 51824.000000
[Fri Aug 31 17:00:47 2012] Offset between fit and detection position for source 3 = 0.179265 pixels
[Fri Aug 31 17:00:47 2012] 52281.100000 total counts/ 19190.000000 bgd. counts: snr = 238.876659
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.179265 pixels
  Position = (285.1, 279.3) = 17 45 2.40 -28 54 50.0
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source counts = 33091.1 +/- 228.7
  Background counts = 19190.0
  Rate = 0.9 +/- 0.006
[Fri Aug 31 17:00:47 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:00:47 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 17:00:47 2012] Source does appear to be extended
[Fri Aug 31 17:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 19:18:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 19:18:11 2012] Initial guess for spatial extent in simple fitting = 5.54"
[Fri Aug 31 19:18:11 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.271
[Fri Aug 31 19:18:11 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.54"
[Fri Aug 31 21:51:26 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 31 21:51:26 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 31 21:51:26 2012] Fit fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Aug 31 21:51:27 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 31 21:51:27 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 31 21:51:27 2012] Fit fullrun_mos2_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 31 21:51:36 2012] Spatial fit model total counts = 53330.900000, observed total counts = 51824.000000
[Fri Aug 31 21:51:36 2012] Offset between fit and detection position for source 3 = 0.041682 pixels
[Fri Aug 31 21:51:36 2012] 52878.900000 total counts/ 20443.000000 bgd. counts: snr = 226.857759
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.041682 pixels
  Position = (285.1, 279.2) = 17 45 2.41 -28 54 50.1
  Extent = 6.1" x 4.9", rotation angle = 255
  Source counts = 32435.9 +/- 230.0
  Background counts = 20443.0
  Rate = 0.9 +/- 0.007
[Fri Aug 31 21:51:36 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:51:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:51:36 2012] Assessing source extent using major
[Fri Aug 31 21:51:36 2012] Source does appear to be extended
[Fri Aug 31 21:51:36 2012] Computing asymmetry using major and minor axis, asym = 1.26
[Fri Aug 31 22:06:06 2012] Counts = 32435.900000, rescaling region sizes by 3.000000
[Fri Aug 31 22:06:06 2012] XMMSAS src. selection expression = ellipse(24754.051960, 24245.492200, 1106.598632, 877.950025, 254.646000, X, Y)
[Fri Aug 31 22:06:06 2012] Writing source region out to fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src3_src.reg
[Fri Aug 31 22:06:06 2012] Extracting stamp from image fullrun_mos2_xmm0506291201_pi300-10000_cl_sm2.00.img.gz, (221, 216) - (349, 343)
[Fri Aug 31 22:06:06 2012] XMMSAS bgd. selection expression = annulus(24754.051960, 24245.492200, 5532.993159, 11065.986318, X, Y) && !ellipse(16063.854440, 16137.617800, 2454.000071, 1190.973634, 216.147000, X, Y) && !ellipse(25243.834600, 24233.575800, 433.242412, 433.242412, 0.000000, X, Y) && !ellipse(14851.362200, 17411.595000, 1422.872041, 737.878421, 0.000000, X, Y) && !ellipse(13863.922546, 18237.647888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23760.145996, 24480.866974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23917.921112, 24062.617554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23914.551880, 23625.477600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26929.825340, 19611.314400, 379.400011, 379.400011, 0.000000, X, Y) && !ellipse(15707.790000, 18298.308000, 1589.336046, 824.808024, 359.800170, X, Y) && !ellipse(16174.229477, 18486.069687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23958.397034, 25522.089813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14396.185562, 19346.021729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13382.752914, 19355.295746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15111.806229, 18224.263885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25385.329254, 28142.131134, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 22:06:06 2012] Writing fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src3.gif
[Fri Aug 31 22:06:15 2012] Mean detx,y = (71.71, 52.19) 
[Fri Aug 31 22:06:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 22:08:35 2012] grppha failed
[Fri Aug 31 22:08:35 2012] Setting source spectrum file to fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src3_src.pi.gz
[Fri Aug 31 22:08:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Aug 31 22:19:22 2012] Updating aperture counts using extracted products
[Fri Aug 31 22:19:22 2012] Error reading totcts from fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src3_src.pi.gz
[Fri Aug 31 22:19:23 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 22:19:24 2012] Source 3 has no response, skipping
[Fri Aug 31 22:19:25 2012] xmm0506291201/analysis//spectral/fullrun_mos2_xmm0506291201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete