[Fri Aug 31 13:07:23 2012] Detection parameters:
  Position = (281.6, 313.7) = 17 45 3.56 -28 52 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.7 +/- 17.6
  Background counts = 101.1
  Rate = 0.003 +/- 0.0005

[Fri Aug 31 13:07:24 2012] Off-axis axis estimate = 1.65'
[Fri Aug 31 14:53:33 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 14:53:33 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Fri Aug 31 14:53:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.639
[Fri Aug 31 14:53:33 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 7.25"
[Fri Aug 31 17:00:29 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src40.ximg exists
[Fri Aug 31 17:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src40.csv
[Fri Aug 31 17:00:29 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src40_1.ximg exists
[Fri Aug 31 17:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src40.csv
[Fri Aug 31 17:00:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 17:00:30 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Fri Aug 31 17:00:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src40.csv
[Fri Aug 31 17:00:30 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Fri Aug 31 17:00:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src40.csv
[Fri Aug 31 17:00:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 17:00:47 2012] Source 20 is offset by -4.035615 and -4.501496 pixels which is larger than
2 X fitted extent = 0.848538 x 0.848538, not incorporating fit results
[Fri Aug 31 17:00:47 2012] Spatial fit model total counts = 1341.030000, observed total counts = 1382.000000
[Fri Aug 31 17:00:47 2012] Offset between fit and detection position for source 20 = 3.093726 pixels
[Fri Aug 31 17:00:47 2012] Warning, changing simple spatial fit ID from 40 to 35
[Fri Aug 31 17:00:47 2012] 1281.931500 total counts/ 1254.920000 bgd. counts: snr = 0.762501
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 3.093726 pixels
  Position = (284.3, 312.3) = 17 45 2.66 -28 52 26.5
  Extent = 6.1 (1.7-9.9)", rotation angle = 0
  Source counts = 27.0 +/- 35.8
  Background counts = 1254.9
  Rate = 0.0008 +/- 0.001
  Deleting source due to low Poisson probability