[Fri Aug 31 13:07:23 2012] Detection parameters:
  Position = (439.0, 353.8) = 17 44 11.46 -28 49 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.7 +/- 13.4
  Background counts = 41.9
  Rate = 0.002 +/- 0.0003

[Fri Aug 31 13:07:24 2012] Off-axis axis estimate = 10.95'
[Fri Aug 31 14:53:33 2012] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 14:53:33 2012] Initial guess for spatial extent in simple fitting = 11.90"
[Fri Aug 31 14:53:33 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.859
[Fri Aug 31 14:53:33 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 11.90"
[Fri Aug 31 17:00:29 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src49.ximg exists
[Fri Aug 31 17:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src49.csv
[Fri Aug 31 17:00:29 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src49_1.ximg exists
[Fri Aug 31 17:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src49.csv
[Fri Aug 31 17:00:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 17:00:30 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Fri Aug 31 17:00:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src49.csv
[Fri Aug 31 17:00:30 2012] fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Fri Aug 31 17:00:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src49.csv
[Fri Aug 31 17:00:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 17:00:47 2012] Spatial fit model total counts = 394.026000, observed total counts = 307.000000
[Fri Aug 31 17:00:47 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 31 17:00:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:00:48 2012] Assessing source extent using major
[Fri Aug 31 17:00:48 2012] Source does appear to be extended
[Fri Aug 31 17:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 17:00:48 2012] Deleting source due to low Poisson probability 0.9