[Fri Aug 31 13:06:57 2012] Detection parameters:
  Position = (194.7, 200.8) = 17 45 32.40 -29 0 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.8 +/- 22.9
  Background counts = 134.3
  Rate = 0.005 +/- 0.001

[Fri Aug 31 13:06:57 2012] Off-axis axis estimate = 10.33'
[Fri Aug 31 13:09:22 2012] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 13:09:22 2012] Initial guess for spatial extent in simple fitting = 11.59"
[Fri Aug 31 13:09:22 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.898
[Fri Aug 31 13:09:22 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 11.59"
[Fri Aug 31 14:53:32 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src36.ximg exists
[Fri Aug 31 14:53:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src36.csv
[Fri Aug 31 14:53:32 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src36_1.ximg exists
[Fri Aug 31 14:53:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src36.csv
[Fri Aug 31 14:53:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 14:53:33 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Fri Aug 31 14:53:33 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Fri Aug 31 14:53:33 2012] Fit fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Fri Aug 31 17:00:39 2012] Source 36 is offset by -1.070416 and 3.039371 pixels which is larger than
2 X fitted extent = 1.404616 x 1.404616, not incorporating fit results
[Fri Aug 31 17:00:40 2012] Spatial fit model total counts = 2842.410000, observed total counts = 2842.000000
[Fri Aug 31 17:00:40 2012] Offset between fit and detection position for source 36 = 9.160127 pixels
[Fri Aug 31 17:00:40 2012] 2467.772000 total counts/ 1685.540000 bgd. counts: snr = 19.053118
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 9.160127 pixels
  Position = (201.0, 207.4) = 17 45 30.30 -29 0 2.4
  Extent = 23.2 (19.5-46.4)", rotation angle = 0
  Source counts = 782.2 +/- 49.7
  Background counts = 1685.5
  Rate = 0.02 +/- 0.001
[Fri Aug 31 17:00:40 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:00:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:00:40 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 17:00:40 2012] Source does appear to be extended
[Fri Aug 31 17:00:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 17:00:40 2012] Source is confused with source 34
[Fri Aug 31 17:00:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 17:00:54 2012] Initial guess for spatial extent in simple fitting = 23.19"
[Fri Aug 31 17:00:54 2012] source mask rpix=5.3, npix_max = 135, mask sum = 132, frac = 0.971
[Fri Aug 31 17:00:54 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 23.19"
[Fri Aug 31 19:18:10 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src28.ximg exists
[Fri Aug 31 19:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src28.csv
[Fri Aug 31 19:18:10 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src28_1.ximg exists
[Fri Aug 31 19:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src28.csv
[Fri Aug 31 19:18:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 19:18:10 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Fri Aug 31 19:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src28.csv
[Fri Aug 31 19:18:10 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Aug 31 19:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src28.csv
[Fri Aug 31 19:18:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 21:51:33 2012] Source 36 is offset by -3.316598 and -8.936644 pixels which is larger than
2 X fitted extent = 1.292120 x 1.292120, not incorporating fit results
[Fri Aug 31 21:51:33 2012] Warning, spatial fit 28 centroid is now closest to src. 1
[Fri Aug 31 21:51:33 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:51:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:51:33 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 21:51:33 2012] Source does appear to be extended
[Fri Aug 31 21:51:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 21:51:41 2012] XMMSAS src. selection expression = ellipse(17438.724000, 17994.568000, 1391.298040, 1391.298040, 0.000000, X, Y)
[Fri Aug 31 21:51:41 2012] Writing source region out to fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src36_src.reg
[Fri Aug 31 21:51:41 2012] Extracting stamp from image fullrun_mos1_xmm0506291201_pi300-10000_cl_sm2.00.img.gz, (121, 127) - (281, 287)
[Fri Aug 31 21:51:41 2012] XMMSAS bgd. selection expression = annulus(17438.724000, 17994.568000, 2318.830067, 4637.660133, X, Y) && !ellipse(16032.331436, 16141.709351, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(15096.068000, 17232.424000, 1952.272056, 1952.272056, 0.000000, X, Y) && !ellipse(13676.992000, 18462.020000, 688.988820, 688.988820, 0.000000, X, Y) && !ellipse(13472.543350, 19794.142883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14148.917374, 19521.748825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13388.576721, 19260.134186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14697.507492, 18988.106522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16820.354752, 18822.439331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16535.236465, 18751.094711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13476.637405, 16946.201813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17572.451538, 16718.657837, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 21:51:41 2012] Writing fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src36.gif
[Fri Aug 31 22:05:10 2012] Mean detx,y = (6657.79, 7335.11) 
[Fri Aug 31 22:05:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 22:05:35 2012] grppha failed
[Fri Aug 31 22:05:35 2012] Setting source spectrum file to fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src36_src.pi.gz
[Fri Aug 31 22:05:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Fri Aug 31 22:19:22 2012] Updating aperture counts using extracted products
[Fri Aug 31 22:19:22 2012] Error reading totcts from fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src36_src.pi.gz
[Fri Aug 31 22:19:22 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 22:19:23 2012] Flag b found in src. 36 procflags, skipping spectral fitting
[Fri Aug 31 22:19:23 2012] Flag c found in src. 36 procflags, skipping spectral fitting
[Fri Aug 31 22:19:23 2012] Source 36 has no response, skipping
[Fri Aug 31 22:19:24 2012] xmm0506291201/analysis//spectral/fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete