[Fri Aug 31 13:06:56 2012] Detection parameters:
  Position = (285.3, 279.1) = 17 45 2.34 -28 54 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58582.5 +/- 285.0
  Background counts = 113.0
  Rate = 2 +/- 0.008

[Fri Aug 31 13:06:57 2012] Off-axis axis estimate = 1.69'
[Fri Aug 31 13:09:22 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 13:09:22 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Aug 31 13:09:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Fri Aug 31 13:09:22 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.27"
[Fri Aug 31 14:53:32 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug 31 14:53:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src3.csv
[Fri Aug 31 14:53:32 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug 31 14:53:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src3.csv
[Fri Aug 31 14:53:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 14:53:32 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 31 14:53:32 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 31 14:53:32 2012] Fit fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Aug 31 17:00:39 2012] Spatial fit model total counts = 54372.900000, observed total counts = 54373.000000
[Fri Aug 31 17:00:39 2012] Offset between fit and detection position for source 3 = 0.159624 pixels
[Fri Aug 31 17:00:39 2012] 54420.300000 total counts/ 16367.900000 bgd. counts: snr = 297.430548
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.159624 pixels
  Position = (285.3, 279.3) = 17 45 2.33 -28 54 49.9
  Extent = 6.5 (6.4-6.6)", rotation angle = 0
  Source counts = 38052.4 +/- 233.3
  Background counts = 16367.9
  Rate = 1 +/- 0.007
[Fri Aug 31 17:00:40 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:00:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:00:40 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 17:00:40 2012] Source does appear to be extended
[Fri Aug 31 17:00:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 17:00:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 17:00:54 2012] Initial guess for spatial extent in simple fitting = 6.51"
[Fri Aug 31 17:00:54 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.004
[Fri Aug 31 17:00:54 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.51"
[Fri Aug 31 19:18:10 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 31 19:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src3.csv
[Fri Aug 31 19:18:10 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 31 19:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src3.csv
[Fri Aug 31 19:18:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 19:18:10 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 31 19:18:10 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 31 19:18:10 2012] Fit fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug 31 21:51:33 2012] Spatial fit model total counts = 54373.000000, observed total counts = 54373.000000
[Fri Aug 31 21:51:33 2012] Offset between fit and detection position for source 3 = 0.000012 pixels
[Fri Aug 31 21:51:33 2012] 54420.300000 total counts/ 16374.800000 bgd. counts: snr = 297.313955
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000012 pixels
  Position = (285.3, 279.3) = 17 45 2.33 -28 54 49.9
  Extent = 6.5 (6.4-6.6)", rotation angle = 0
  Source counts = 38045.5 +/- 233.3
  Background counts = 16374.8
  Rate = 1 +/- 0.007
[Fri Aug 31 21:51:33 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:51:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:51:33 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 21:51:33 2012] Source does appear to be extended
[Fri Aug 31 21:51:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 21:51:41 2012] Counts = 38045.500000, rescaling region sizes by 3.000000
[Fri Aug 31 21:51:41 2012] XMMSAS src. selection expression = ellipse(24776.548000, 24249.790600, 1171.117834, 1171.117834, 0.000000, X, Y)
[Fri Aug 31 21:51:41 2012] Writing source region out to fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src3_src.reg
[Fri Aug 31 21:51:41 2012] Extracting stamp from image fullrun_mos1_xmm0506291201_pi300-10000_cl_sm2.00.img.gz, (218, 212) - (353, 347)
[Fri Aug 31 21:51:41 2012] XMMSAS bgd. selection expression = annulus(24776.548000, 24249.790600, 5855.589168, 11711.178337, X, Y) && !ellipse(16032.331436, 16141.709351, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(15096.068000, 17232.424000, 1952.272056, 1952.272056, 0.000000, X, Y) && !ellipse(13676.992000, 18462.020000, 688.988820, 688.988820, 0.000000, X, Y) && !ellipse(25352.614940, 28138.299200, 723.838421, 723.838421, 0.000000, X, Y) && !ellipse(23050.761993, 23529.315094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26566.713745, 23016.469635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24991.277771, 22400.683380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25952.531128, 22376.079224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25468.142273, 22354.318604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24550.365021, 22404.121643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24368.795532, 21962.691162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13472.543350, 19794.142883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14148.917374, 19521.748825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26920.728464, 19616.089600, 342.524010, 342.524010, 0.000000, X, Y) && !ellipse(13388.576721, 19260.134186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14697.507492, 18988.106522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16820.354752, 18822.439331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16535.236465, 18751.094711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17438.724000, 17994.568000, 1855.064053, 1855.064053, 0.000000, X, Y) && !ellipse(13476.637405, 16946.201813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17572.451538, 16718.657837, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 21:51:41 2012] Writing fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src3.gif
[Fri Aug 31 21:59:19 2012] Mean detx,y = (268.43, -234.68) 
[Fri Aug 31 21:59:21 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 22:02:20 2012] grppha failed
[Fri Aug 31 22:02:21 2012] Setting source spectrum file to fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src3_src.pi.gz
[Fri Aug 31 22:02:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Aug 31 22:19:22 2012] Updating aperture counts using extracted products
[Fri Aug 31 22:19:22 2012] Error reading totcts from fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src3_src.pi.gz
[Fri Aug 31 22:19:22 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 22:19:23 2012] Source 3 has no response, skipping
[Fri Aug 31 22:19:24 2012] xmm0506291201/analysis//spectral/fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete