[Fri Aug 31 13:06:56 2012] Detection parameters:
  Position = (171.7, 201.9) = 17 45 40.00 -29 0 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1987.0 +/- 59.8
  Background counts = 144.2
  Rate = 0.09 +/- 0.003

[Fri Aug 31 13:06:57 2012] Off-axis axis estimate = 11.55'
[Fri Aug 31 13:09:22 2012] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 13:09:22 2012] Initial guess for spatial extent in simple fitting = 12.20"
[Fri Aug 31 13:09:22 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.961
[Fri Aug 31 13:09:22 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.20"
[Fri Aug 31 14:53:31 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src2.ximg exists
[Fri Aug 31 14:53:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src2.csv
[Fri Aug 31 14:53:32 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Aug 31 14:53:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src2.csv
[Fri Aug 31 14:53:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 14:53:32 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Aug 31 14:53:32 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Aug 31 14:53:32 2012] Fit fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Aug 31 17:00:39 2012] Spatial fit model total counts = 7438.100000, observed total counts = 7438.000000
[Fri Aug 31 17:00:39 2012] Offset between fit and detection position for source 2 = 4.038260 pixels
[Fri Aug 31 17:00:39 2012] 7204.450000 total counts/ 1032.520000 bgd. counts: snr = 192.075404
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 4.038260 pixels
  Position = (174.1, 198.6) = 17 45 39.23 -29 0 40.4
  Extent = 24.4 (24.4-48.8)", rotation angle = 0
  Source counts = 6171.9 +/- 84.9
  Background counts = 1032.5
  Rate = 0.2 +/- 0.002
[Fri Aug 31 17:00:40 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:00:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:00:40 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 17:00:40 2012] Source does appear to be extended
[Fri Aug 31 17:00:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 17:00:40 2012] Source is confused with source 1
[Fri Aug 31 17:00:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 17:00:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 31 17:00:54 2012] Initial guess for spatial extent in simple fitting = 24.40"
[Fri Aug 31 17:00:54 2012] source mask rpix=5.6, npix_max = 149, mask sum = 144, frac = 0.964
[Fri Aug 31 17:00:54 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 24.40"
[Fri Aug 31 19:18:09 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src2.ximg exists
[Fri Aug 31 19:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src2.csv
[Fri Aug 31 19:18:10 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Aug 31 19:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src2.csv
[Fri Aug 31 19:18:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 19:18:10 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Aug 31 19:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Aug 31 19:18:10 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Aug 31 19:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Aug 31 19:18:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 21:51:33 2012] Warning, spatial fit 2 centroid is now closest to src. 1
[Fri Aug 31 21:51:33 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:51:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:51:33 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 21:51:33 2012] Source does appear to be extended
[Fri Aug 31 21:51:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 21:51:40 2012] Counts = 6171.930000, rescaling region sizes by 2.000000
[Fri Aug 31 21:51:40 2012] XMMSAS src. selection expression = ellipse(15096.068000, 17232.424000, 2928.408084, 2928.408084, 0.000000, X, Y)
[Fri Aug 31 21:51:40 2012] Writing source region out to fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug 31 21:51:40 2012] Extracting stamp from image fullrun_mos1_xmm0506291201_pi300-10000_cl_sm2.00.img.gz, (6, 30) - (342, 367)
[Fri Aug 31 21:51:41 2012] XMMSAS bgd. selection expression = annulus(15096.068000, 17232.424000, 9761.360281, 19522.720562, X, Y) && !ellipse(16032.331436, 16141.709351, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24776.548000, 24249.790600, 1561.490445, 1561.490445, 0.000000, X, Y) && !ellipse(13676.992000, 18462.020000, 688.988820, 688.988820, 0.000000, X, Y) && !ellipse(12128.481232, 30831.370483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25352.614940, 28138.299200, 723.838421, 723.838421, 0.000000, X, Y) && !ellipse(23050.761993, 23529.315094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26566.713745, 23016.469635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24991.277771, 22400.683380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25952.531128, 22376.079224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25468.142273, 22354.318604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24550.365021, 22404.121643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24368.795532, 21962.691162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13472.543350, 19794.142883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14148.917374, 19521.748825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26920.728464, 19616.089600, 342.524010, 342.524010, 0.000000, X, Y) && !ellipse(13388.576721, 19260.134186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14697.507492, 18988.106522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16820.354752, 18822.439331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16535.236465, 18751.094711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17438.724000, 17994.568000, 1855.064053, 1855.064053, 0.000000, X, Y) && !ellipse(13476.637405, 16946.201813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17572.451538, 16718.657837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32500.459340, 36712.684800, 501.892814, 501.892814, 0.000000, X, Y)
[Fri Aug 31 21:51:41 2012] Writing fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src2.gif
[Fri Aug 31 21:55:36 2012] Mean detx,y = (7980.08, 8790.87) 
[Fri Aug 31 21:55:37 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 21:59:11 2012] grppha failed
[Fri Aug 31 21:59:11 2012] Setting source spectrum file to fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src2_src.pi.gz
[Fri Aug 31 21:59:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug 31 22:19:22 2012] Updating aperture counts using extracted products
[Fri Aug 31 22:19:22 2012] Error reading totcts from fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src2_src.pi.gz
[Fri Aug 31 22:19:22 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 22:19:23 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Aug 31 22:19:23 2012] Source 2 has no response, skipping
[Fri Aug 31 22:19:24 2012] xmm0506291201/analysis//spectral/fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete