[Fri Aug 31 13:06:56 2012] Detection parameters:
  Position = (184.8, 186.1) = 17 45 35.66 -29 1 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54465.8 +/- 280.9
  Background counts = 134.0
  Rate = 3 +/- 0.01

[Fri Aug 31 13:06:57 2012] Off-axis axis estimate = 11.58'
[Fri Aug 31 13:09:22 2012] Using EEF radius (= 12.22 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 13:09:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 31 13:09:22 2012] Initial guess for spatial extent in simple fitting = 12.22"
[Fri Aug 31 13:09:22 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.822
[Fri Aug 31 13:09:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.22"
[Fri Aug 31 14:53:31 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 31 14:53:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src1.csv
[Fri Aug 31 14:53:31 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 31 14:53:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src1.csv
[Fri Aug 31 14:53:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 14:53:32 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 31 14:53:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Aug 31 14:53:32 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 31 14:53:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Aug 31 14:53:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506291201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 17:00:39 2012] Warning, spatial fit 1 centroid is now closest to src. 36
[Fri Aug 31 17:00:40 2012] Source 1 is offset by -6.593041 and 2.111464 pixels which is larger than
2 X fitted extent = 6.518483 x 6.518483, not incorporating fit results
[Fri Aug 31 17:00:40 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:00:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:00:40 2012] Assessing source extent using major
[Fri Aug 31 17:00:40 2012] Source does appear to be extended
[Fri Aug 31 17:00:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 17:00:40 2012] Source is confused with source 2
[Fri Aug 31 17:00:54 2012] Using EEF radius (= 12.22 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 17:00:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 31 17:00:54 2012] Initial guess for spatial extent in simple fitting = 12.22"
[Fri Aug 31 17:00:54 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.822
[Fri Aug 31 17:00:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.22"
[Fri Aug 31 19:18:09 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 31 19:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src1.csv
[Fri Aug 31 19:18:09 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 31 19:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src1.csv
[Fri Aug 31 19:18:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 19:18:10 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 31 19:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Aug 31 19:18:10 2012] fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 31 19:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Aug 31 19:18:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506291201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 21:51:33 2012] Warning, spatial fit 1 centroid is now closest to src. 35
[Fri Aug 31 21:51:33 2012] Spatial fit model total counts = 38188.200000, observed total counts = 66322.000000
[Fri Aug 31 21:51:33 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 31 21:51:33 2012] Spatial fit model total counts = 25258.900000, observed total counts = 33992.000000
[Fri Aug 31 21:51:33 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 31 21:51:33 2012] Source 1 is offset by -6.652604 and 3.609418 pixels which is larger than
2 X fitted extent = 1.422018 x 1.422018, not incorporating fit results
[Fri Aug 31 21:51:33 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 21:51:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 21:51:33 2012] Assessing source extent using major
[Fri Aug 31 21:51:33 2012] Source does appear to be extended
[Fri Aug 31 21:51:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 21:51:40 2012] Counts = 54465.753906, rescaling region sizes by 3.000000
[Fri Aug 31 21:51:40 2012] XMMSAS src. selection expression = ellipse(16032.331436, 16141.709351, 1957.500000, 1957.500000, 0.000000, X, Y)
[Fri Aug 31 21:51:40 2012] Writing source region out to fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 31 21:51:40 2012] Extracting stamp from image fullrun_mos1_xmm0506291201_pi300-10000_cl_sm2.00.img.gz, (72, 74) - (297, 299)
[Fri Aug 31 21:51:40 2012] XMMSAS bgd. selection expression = annulus(16032.331436, 16141.709351, 9787.500000, 19575.000000, X, Y) && !ellipse(15096.068000, 17232.424000, 1952.272056, 1952.272056, 0.000000, X, Y) && !ellipse(24776.548000, 24249.790600, 1561.490445, 1561.490445, 0.000000, X, Y) && !ellipse(13676.992000, 18462.020000, 688.988820, 688.988820, 0.000000, X, Y) && !ellipse(12128.481232, 30831.370483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25352.614940, 28138.299200, 723.838421, 723.838421, 0.000000, X, Y) && !ellipse(23050.761993, 23529.315094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26566.713745, 23016.469635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24991.277771, 22400.683380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25952.531128, 22376.079224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25468.142273, 22354.318604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24550.365021, 22404.121643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24368.795532, 21962.691162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13472.543350, 19794.142883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14148.917374, 19521.748825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26920.728464, 19616.089600, 342.524010, 342.524010, 0.000000, X, Y) && !ellipse(13388.576721, 19260.134186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14697.507492, 18988.106522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16820.354752, 18822.439331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16535.236465, 18751.094711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17438.724000, 17994.568000, 1855.064053, 1855.064053, 0.000000, X, Y) && !ellipse(13476.637405, 16946.201813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17572.451538, 16718.657837, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 21:51:40 2012] Writing fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src1.gif
[Fri Aug 31 21:51:50 2012] Mean detx,y = (8344.96, 8491.39) 
[Fri Aug 31 21:51:52 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 21:55:26 2012] grppha failed
[Fri Aug 31 21:55:26 2012] Setting source spectrum file to fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 31 21:55:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 31 22:06:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 31 22:06:04 2012] rmf not generated due to insufficient counts
[Fri Aug 31 22:19:22 2012] Updating aperture counts using extracted products
[Fri Aug 31 22:19:22 2012] Error reading totcts from fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 31 22:19:22 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 22:19:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 22:19:24 2012] xmm0506291201/analysis//spectral/fullrun_mos1_xmm0506291201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete