[Thu Nov 24 06:39:25 2011] Detection parameters:
  Position = (288.1, 195.1) = 4 33 46.19 -13 24 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 223.2 +/- 33.8
  Background counts = 398.1
  Rate = 0.006 +/- 0.0009

[Thu Nov 24 06:39:26 2011] Off-axis axis estimate = 7.53'
[Thu Nov 24 06:48:36 2011] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 06:48:36 2011] Initial guess for spatial extent in simple fitting = 10.19"
[Thu Nov 24 06:48:36 2011] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.113
[Thu Nov 24 06:48:36 2011] Giving source the simple spatial ID 67 for pass 0, mean size = 10.19"
[Thu Nov 24 11:32:22 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src67.ximg exists
[Thu Nov 24 11:32:22 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src67_1.ximg exists
[Thu Nov 24 11:32:22 2011] Fit fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src67 appears to have run properly
[Thu Nov 24 11:32:24 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Thu Nov 24 11:32:24 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Thu Nov 24 11:32:24 2011] Fit fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Fri Nov 25 00:33:17 2011] Spatial fit model total counts = 4765.530000, observed total counts = 4756.000000
[Fri Nov 25 00:33:17 2011] Offset between fit and detection position for source 79 = 3.716158 pixels
[Fri Nov 25 00:33:17 2011] Warning, changing simple spatial fit ID from 67 to 65
[Fri Nov 25 00:33:17 2011] 4752.850000 total counts/ 4208.890000 bgd. counts: snr = 8.384616
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 3.716158 pixels
  Position = (284.4, 195.7) = 4 33 47.28 -13 24 14.9
  Extent = 20.0 (20.0-40.1)", rotation angle = 0
  Source counts = 544.0 +/- 68.9
  Background counts = 4208.9
  Rate = 0.008 +/- 0.001
[Fri Nov 25 00:33:17 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:17 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 00:33:17 2011] Source does appear to be extended
[Fri Nov 25 00:33:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:33:17 2011] Source is confused with source 78
[Fri Nov 25 00:34:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 00:34:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov 25 00:34:12 2011] Initial guess for spatial extent in simple fitting = 20.04"
[Fri Nov 25 00:34:12 2011] source mask rpix=4.6, npix_max = 104, mask sum = 110, frac = 1.054
[Fri Nov 25 00:34:12 2011] Giving source the simple spatial ID 59 for pass 1, mean size = 20.04"
[Fri Nov 25 11:10:20 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src59.ximg exists
[Fri Nov 25 11:10:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src59.csv
[Fri Nov 25 11:10:20 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src59_1.ximg exists
[Fri Nov 25 11:10:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src59.csv
[Fri Nov 25 11:10:20 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 11:10:21 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Fri Nov 25 11:10:21 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Fri Nov 25 11:10:21 2011] Fit fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Fri Nov 25 16:37:30 2011] Spatial fit model total counts = 10033.300000, observed total counts = 10023.000000
[Fri Nov 25 16:37:30 2011] Offset between fit and detection position for source 79 = 0.646816 pixels
[Fri Nov 25 16:37:30 2011] Warning, changing simple spatial fit ID from 59 to 56
[Fri Nov 25 16:37:30 2011] 9650.660000 total counts/ 7693.940000 bgd. counts: snr = 22.307674
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 0.646816 pixels
  Position = (285.0, 196.0) = 4 33 47.11 -13 24 13.6
  Extent = 33.1 (32.8-33.2)", rotation angle = 0
  Source counts = 1956.7 +/- 98.2
  Background counts = 7693.9
  Rate = 0.03 +/- 0.002
[Fri Nov 25 16:37:30 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:30 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 16:37:30 2011] Source does appear to be extended
[Fri Nov 25 16:37:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 16:38:01 2011] Counts = 1956.720000, rescaling region sizes by 2.000000
[Fri Nov 25 16:38:01 2011] XMMSAS src. selection expression = ellipse(24748.196000, 17002.658000, 3967.596114, 3967.596114, 0.000000, X, Y)
[Fri Nov 25 16:38:01 2011] Writing source region out to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src79_src.reg
[Fri Nov 25 16:38:01 2011] Extracting stamp from image fullrun_pn_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (57, 0) - (513, 424)
[Fri Nov 25 16:38:02 2011] XMMSAS bgd. selection expression = annulus(24748.196000, 17002.658000, 13225.320381, 26450.640761, X, Y) && !ellipse(27538.831200, 27247.251400, 3493.632101, 3493.632101, 0.000000, X, Y) && !ellipse(27718.160000, 28624.486000, 2537.856073, 2537.856073, 0.000000, X, Y) && !ellipse(29013.566000, 28698.080000, 3805.488110, 3805.488110, 0.000000, X, Y) && !ellipse(31575.994690, 31607.016052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40355.411926, 33947.031433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25044.917328, 31031.400391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28798.611023, 30397.644897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25050.604401, 28290.605682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23571.479614, 28494.432281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24701.906128, 27536.407440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24786.729004, 27105.137756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24086.976400, 26457.460000, 6968.544201, 6968.544201, 0.000000, X, Y) && !ellipse(24161.698000, 25740.200000, 1166.744034, 1166.744034, 0.000000, X, Y) && !ellipse(24723.816000, 23977.320000, 1142.720033, 1142.720033, 0.000000, X, Y) && !ellipse(24313.902802, 24842.909424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36548.291077, 23001.920074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37839.992035, 21956.218201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25554.921400, 21033.110200, 335.219210, 335.219210, 0.000000, X, Y) && !ellipse(35137.469574, 20719.238724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17927.993149, 19327.242706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28738.066400, 14203.870500, 666.723832, 666.723832, 0.000000, X, Y) && !ellipse(27351.407654, 24858.454620, 6960.000000, 6960.000000, 0.000000, X, Y) && !ellipse(41668.140717, 34595.989624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34633.061798, 35904.709320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31433.170044, 35610.614380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35024.330811, 34493.170959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12819.670319, 33782.114288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27515.897180, 33390.509800, 385.737611, 385.737611, 0.000000, X, Y) && !ellipse(16571.206802, 33447.206238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28240.074880, 32582.323400, 388.109611, 388.109611, 0.000000, X, Y) && !ellipse(27652.790649, 32055.530151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38344.057312, 31669.087982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27478.382000, 31708.876000, 4220.088121, 4220.088121, 0.000000, X, Y) && !ellipse(26569.063446, 31519.280609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28704.989380, 31367.333282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27819.924744, 31258.113342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26352.598000, 31246.664000, 1404.480040, 1404.480040, 0.000000, X, Y) && !ellipse(24382.776917, 13282.001190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24249.547546, 31079.581207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22471.060000, 31037.088000, 1424.200041, 1424.200041, 0.000000, X, Y) && !ellipse(41990.130920, 30957.435000, 690.822950, 690.822950, 0.000000, X, Y) && !ellipse(26777.562000, 30825.254000, 1414.488041, 1414.488041, 0.000000, X, Y) && !ellipse(23450.282837, 30579.461304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24498.499023, 30484.074066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23805.114000, 29972.368000, 1380.264040, 1380.264040, 0.000000, X, Y) && !ellipse(28958.812000, 29331.354000, 1389.328040, 1389.328040, 0.000000, X, Y) && !ellipse(15031.280518, 30042.024963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.614000, 29777.088000, 8280.528238, 8280.528238, 0.000000, X, Y) && !ellipse(24280.966000, 29435.479200, 1298.864037, 1298.864037, 0.000000, X, Y) && !ellipse(23282.341614, 27456.005188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23235.267944, 27107.452942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31263.091060, 26859.497000, 812.544023, 812.544023, 0.000000, X, Y) && !ellipse(31528.578522, 25603.400085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23918.335297, 25361.356995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23477.738495, 24750.161285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30622.140900, 25253.557495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20973.615800, 24831.144600, 318.684809, 318.684809, 0.000000, X, Y) && !ellipse(23277.251600, 24289.296000, 1164.720034, 1164.720034, 0.000000, X, Y) && !ellipse(26427.132000, 22287.236000, 1316.040038, 1316.040038, 0.000000, X, Y) && !ellipse(26041.017944, 21605.241913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26107.481293, 20946.591537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26159.136000, 19257.498000, 1511.728043, 1511.728043, 0.000000, X, Y) && !ellipse(25581.478000, 18466.066000, 2973.848086, 2973.848086, 0.000000, X, Y) && !ellipse(25208.858400, 17937.844000, 1327.136038, 1327.136038, 0.000000, X, Y) && !ellipse(24920.014000, 17219.338000, 3186.080092, 2186.432063, 137.838000, X, Y) && !ellipse(24504.459564, 17351.712402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32384.533417, 16793.743393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25719.483276, 16760.586060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25009.750000, 16209.094600, 1639.040047, 1053.072030, 302.148000, X, Y) && !ellipse(24946.309540, 15427.379028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25119.544600, 14960.368600, 1774.424051, 1774.424051, 0.000000, X, Y) && !ellipse(24742.953660, 14877.870400, 1928.688055, 550.272016, 112.541032, X, Y) && !ellipse(24545.917847, 13953.916092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28131.306000, 12544.669400, 853.968025, 853.968025, 0.000000, X, Y)
[Fri Nov 25 16:38:02 2011] Writing fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src79.gif
[Fri Nov 25 19:58:18 2011] Mean detx,y = (-119.83, 9938.07) 
[Fri Nov 25 19:58:32 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 20:08:25 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 20:08:26 2011] Setting source spectrum file to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Fri Nov 25 20:08:26 2011] Setting bgd. spectrum file to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src79_bgd.pi.gz
[Tue Nov 29 02:21:36 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:37 2011] Error reading totcts from fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Tue Nov 29 02:21:42 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:42 2011] Using photon index=1.80, rate=0.03, arf fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src79.arf
[Tue Nov 29 02:21:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:42 2011] Updating source flux to 1.3e-13
[Tue Nov 29 02:34:19 2011] Flag c found in src. 79 procflags, skipping spectral fitting