[Thu Nov 24 06:39:23 2011] Detection parameters:
  Position = (464.4, 390.8) = 4 32 53.68 -13 10 6.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 826.9 +/- 41.2
  Background counts = 204.6
  Rate = 0.01 +/- 0.0005

[Thu Nov 24 06:39:26 2011] Off-axis axis estimate = 13.77'
[Thu Nov 24 06:48:36 2011] Using EEF radius (= 13.31 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 06:48:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 06:48:36 2011] Initial guess for spatial extent in simple fitting = 13.31"
[Thu Nov 24 06:48:36 2011] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.966
[Thu Nov 24 06:48:36 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 13.31"
[Thu Nov 24 11:32:20 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src4.ximg exists
[Thu Nov 24 11:32:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src4.csv
[Thu Nov 24 11:32:20 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Nov 24 11:32:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src4.csv
[Thu Nov 24 11:32:20 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 11:32:22 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Nov 24 11:32:22 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Nov 24 11:32:22 2011] Fit fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Nov 25 00:33:17 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.436529 pixels away
[Fri Nov 25 00:33:17 2011] Source 5 is offset by -1.784691 and 4.555764 pixels which is larger than
2 X fitted extent = 1.600317 x 1.600317, not incorporating fit results
[Fri Nov 25 00:33:17 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:17 2011] Assessing source extent using major
[Fri Nov 25 00:33:17 2011] Source does appear to be extended
[Fri Nov 25 00:33:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:34:12 2011] Using EEF radius (= 13.31 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 00:34:12 2011] Initial guess for spatial extent in simple fitting = 13.31"
[Fri Nov 25 00:34:12 2011] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.966
[Fri Nov 25 00:34:12 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 13.31"
[Fri Nov 25 11:10:17 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src4.ximg exists
[Fri Nov 25 11:10:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src4.csv
[Fri Nov 25 11:10:17 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Nov 25 11:10:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src4.csv
[Fri Nov 25 11:10:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 11:10:20 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Nov 25 11:10:20 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Nov 25 11:10:20 2011] Fit fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Nov 25 16:37:30 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.779657 pixels away
[Fri Nov 25 16:37:30 2011] Source 5 is offset by -1.784691 and 4.555764 pixels which is larger than
2 X fitted extent = 1.600317 x 1.600317, not incorporating fit results
[Fri Nov 25 16:37:30 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:30 2011] Assessing source extent using major
[Fri Nov 25 16:37:30 2011] Source does appear to be extended
[Fri Nov 25 16:37:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 16:37:58 2011] XMMSAS src. selection expression = ellipse(40355.411926, 33947.031433, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Nov 25 16:37:58 2011] Writing source region out to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src5_src.reg
[Fri Nov 25 16:37:58 2011] Extracting stamp from image fullrun_pn_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (427, 353) - (502, 428)
[Fri Nov 25 16:37:58 2011] XMMSAS bgd. selection expression = annulus(40355.411926, 33947.031433, 1087.500000, 2175.000000, X, Y) && !ellipse(41668.140717, 34595.989624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38344.057312, 31669.087982, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Nov 25 16:37:58 2011] Writing fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src5.gif
[Fri Nov 25 17:24:40 2011] Mean detx,y = (11290.19, -9466.25) 
[Fri Nov 25 17:24:44 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 17:24:58 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 17:24:59 2011] Setting source spectrum file to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Nov 25 17:24:59 2011] Setting bgd. spectrum file to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Nov 26 23:38:13 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Nov 26 23:38:13 2011] rmf not generated due to insufficient counts
[Tue Nov 29 02:21:31 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:31 2011] Error reading totcts from fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Nov 29 02:21:37 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:37 2011] Using photon index=1.80, rate=0.0107, arf fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src5.arf
[Tue Nov 29 02:21:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:38 2011] Updating source flux to 6.6e-14
[Tue Nov 29 02:34:19 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting