[Thu Nov 24 06:39:25 2011] Detection parameters:
  Position = (270.1, 352.0) = 4 33 51.55 -13 12 55.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 209.7 +/- 40.9
  Background counts = 795.4
  Rate = 0.004 +/- 0.0008

[Thu Nov 24 06:39:26 2011] Off-axis axis estimate = 4.40'
[Thu Nov 24 06:48:36 2011] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 06:48:36 2011] Initial guess for spatial extent in simple fitting = 8.63"
[Thu Nov 24 06:48:36 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.014
[Thu Nov 24 06:48:36 2011] Giving source the simple spatial ID 40 for pass 0, mean size = 8.63"
[Thu Nov 24 11:32:21 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src40.ximg exists
[Thu Nov 24 11:32:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src40.csv
[Thu Nov 24 11:32:21 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src40_1.ximg exists
[Thu Nov 24 11:32:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src40.csv
[Thu Nov 24 11:32:21 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 11:32:23 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Thu Nov 24 11:32:23 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Thu Nov 24 11:32:23 2011] Fit fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Fri Nov 25 00:33:17 2011] Source 48 is offset by -1.648059 and -3.601824 pixels which is larger than
2 X fitted extent = 1.004069 x 1.004069, not incorporating fit results
[Fri Nov 25 00:33:17 2011] Warning, spatial fit 40 centroid is now closest to src. 50
[Fri Nov 25 00:33:17 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:17 2011] Assessing source extent using major
[Fri Nov 25 00:33:17 2011] Source does appear to be extended
[Fri Nov 25 00:33:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:33:17 2011] Source is confused with source 50
[Fri Nov 25 00:34:12 2011] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 00:34:12 2011] Initial guess for spatial extent in simple fitting = 8.63"
[Fri Nov 25 00:34:12 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.014
[Fri Nov 25 00:34:12 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 8.63"
[Fri Nov 25 11:10:18 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src37.ximg exists
[Fri Nov 25 11:10:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src37.csv
[Fri Nov 25 11:10:18 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src37_1.ximg exists
[Fri Nov 25 11:10:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src37.csv
[Fri Nov 25 11:10:18 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 11:10:21 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Fri Nov 25 11:10:21 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Fri Nov 25 11:10:21 2011] Fit fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Fri Nov 25 16:37:30 2011] Source 48 is offset by -1.592726 and -3.586905 pixels which is larger than
2 X fitted extent = 0.998791 x 0.998791, not incorporating fit results
[Fri Nov 25 16:37:30 2011] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 31.595659 pixels away
[Fri Nov 25 16:37:30 2011] Warning, spatial fit 37 centroid is now closest to src. 50
[Fri Nov 25 16:37:30 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:30 2011] Assessing source extent using major
[Fri Nov 25 16:37:30 2011] Source does appear to be extended
[Fri Nov 25 16:37:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 16:38:00 2011] XMMSAS src. selection expression = ellipse(23450.282837, 30579.461304, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Nov 25 16:38:00 2011] Writing source region out to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src48_src.reg
[Fri Nov 25 16:38:00 2011] Extracting stamp from image fullrun_pn_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (233, 315) - (308, 390)
[Fri Nov 25 16:38:00 2011] XMMSAS bgd. selection expression = annulus(23450.282837, 30579.461304, 1087.500000, 2175.000000, X, Y) && !ellipse(27538.831200, 27247.251400, 3493.632101, 3493.632101, 0.000000, X, Y) && !ellipse(27718.160000, 28624.486000, 2537.856073, 2537.856073, 0.000000, X, Y) && !ellipse(29013.566000, 28698.080000, 3805.488110, 3805.488110, 0.000000, X, Y) && !ellipse(25044.917328, 31031.400391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25050.604401, 28290.605682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23571.479614, 28494.432281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24701.906128, 27536.407440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24086.976400, 26457.460000, 6968.544201, 6968.544201, 0.000000, X, Y) && !ellipse(27351.407654, 24858.454620, 6960.000000, 6960.000000, 0.000000, X, Y) && !ellipse(27478.382000, 31708.876000, 4220.088121, 4220.088121, 0.000000, X, Y) && !ellipse(26352.598000, 31246.664000, 1404.480040, 1404.480040, 0.000000, X, Y) && !ellipse(24249.547546, 31079.581207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22471.060000, 31037.088000, 1424.200041, 1424.200041, 0.000000, X, Y) && !ellipse(26777.562000, 30825.254000, 1414.488041, 1414.488041, 0.000000, X, Y) && !ellipse(24498.499023, 30484.074066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23805.114000, 29972.368000, 1380.264040, 1380.264040, 0.000000, X, Y) && !ellipse(24331.614000, 29777.088000, 8280.528238, 8280.528238, 0.000000, X, Y) && !ellipse(24280.966000, 29435.479200, 1298.864037, 1298.864037, 0.000000, X, Y)
[Fri Nov 25 16:38:00 2011] Writing fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src48.gif
[Fri Nov 25 18:50:09 2011] Mean detx,y = (-4440.98, -2531.84) 
[Fri Nov 25 18:50:12 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 18:50:42 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 18:50:43 2011] Setting source spectrum file to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Fri Nov 25 18:50:43 2011] Setting bgd. spectrum file to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Mon Nov 28 10:44:40 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Nov 28 10:44:41 2011] rmf not generated due to insufficient counts
[Tue Nov 29 02:21:35 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:35 2011] Error reading totcts from fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Tue Nov 29 02:21:40 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:40 2011] Using photon index=1.80, rate=0.0041, arf fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src48.arf
[Tue Nov 29 02:21:40 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:40 2011] Updating source flux to 1.4e-14
[Tue Nov 29 02:34:19 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting