[Thu Nov 24 06:39:24 2011] Detection parameters:
  Position = (309.3, 351.9) = 4 33 39.88 -13 12 53.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 667.3 +/- 62.2
  Background counts = 1499.1
  Rate = 0.01 +/- 0.001

[Thu Nov 24 06:39:26 2011] Off-axis axis estimate = 3.95'
[Thu Nov 24 06:48:36 2011] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 06:48:36 2011] Initial guess for spatial extent in simple fitting = 8.41"
[Thu Nov 24 06:48:36 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.056
[Thu Nov 24 06:48:36 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 8.41"
[Thu Nov 24 11:32:21 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src39.ximg exists
[Thu Nov 24 11:32:21 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src39_1.ximg exists
[Thu Nov 24 11:32:21 2011] Fit fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src39 appears to have run properly
[Thu Nov 24 11:32:23 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Thu Nov 24 11:32:23 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Thu Nov 24 11:32:23 2011] Fit fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Fri Nov 25 00:33:17 2011] Spatial fit model total counts = 14719.500000, observed total counts = 14715.000000
[Fri Nov 25 00:33:17 2011] Offset between fit and detection position for source 47 = 3.116417 pixels
[Fri Nov 25 00:33:17 2011] Warning, changing simple spatial fit ID from 39 to 30
[Fri Nov 25 00:33:17 2011] 14488.912000 total counts/ 14227.500000 bgd. counts: snr = 2.191600
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 3.116417 pixels
  Position = (308.3, 354.9) = 4 33 40.16 -13 12 42.5
  Extent = 17.7 (2.8-35.4)", rotation angle = 0
  Source counts = 261.4 +/- 120.4
  Background counts = 14227.5
  Rate = 0.004 +/- 0.002
[Fri Nov 25 00:33:17 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:17 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 00:33:17 2011] Source does appear to be extended
[Fri Nov 25 00:33:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:33:17 2011] Source is confused with source 38
[Fri Nov 25 00:34:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 00:34:12 2011] Initial guess for spatial extent in simple fitting = 17.68"
[Fri Nov 25 00:34:12 2011] source mask rpix=4.1, npix_max = 83, mask sum = 81, frac = 0.972
[Fri Nov 25 00:34:12 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 17.68"
[Fri Nov 25 11:10:18 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src36.ximg exists
[Fri Nov 25 11:10:18 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src36.csv
[Fri Nov 25 11:10:18 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src36_1.ximg exists
[Fri Nov 25 11:10:18 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src36.csv
[Fri Nov 25 11:10:18 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 11:10:21 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Fri Nov 25 11:10:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src36.csv
[Fri Nov 25 11:10:21 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Fri Nov 25 11:10:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src36.csv
[Fri Nov 25 11:10:21 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 16:37:30 2011] Warning, spatial fit 36 centroid is now closest to src. 53
[Fri Nov 25 16:37:30 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:30 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 16:37:30 2011] Source does appear to be extended
[Fri Nov 25 16:37:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 16:38:00 2011] XMMSAS src. selection expression = ellipse(26777.562000, 30825.254000, 1060.866031, 1060.866031, 0.000000, X, Y)
[Fri Nov 25 16:38:00 2011] Writing source region out to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src47_src.reg
[Fri Nov 25 16:38:00 2011] Extracting stamp from image fullrun_pn_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (247, 294) - (369, 416)
[Fri Nov 25 16:38:00 2011] XMMSAS bgd. selection expression = annulus(26777.562000, 30825.254000, 1768.110051, 3536.220102, X, Y) && !ellipse(27538.831200, 27247.251400, 3493.632101, 3493.632101, 0.000000, X, Y) && !ellipse(27718.160000, 28624.486000, 2537.856073, 2537.856073, 0.000000, X, Y) && !ellipse(29013.566000, 28698.080000, 3805.488110, 3805.488110, 0.000000, X, Y) && !ellipse(25044.917328, 31031.400391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28798.611023, 30397.644897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25050.604401, 28290.605682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23571.479614, 28494.432281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24701.906128, 27536.407440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24786.729004, 27105.137756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24086.976400, 26457.460000, 6968.544201, 6968.544201, 0.000000, X, Y) && !ellipse(27351.407654, 24858.454620, 6960.000000, 6960.000000, 0.000000, X, Y) && !ellipse(27515.897180, 33390.509800, 385.737611, 385.737611, 0.000000, X, Y) && !ellipse(28240.074880, 32582.323400, 388.109611, 388.109611, 0.000000, X, Y) && !ellipse(27652.790649, 32055.530151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27478.382000, 31708.876000, 4220.088121, 4220.088121, 0.000000, X, Y) && !ellipse(26569.063446, 31519.280609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28704.989380, 31367.333282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27819.924744, 31258.113342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26352.598000, 31246.664000, 1404.480040, 1404.480040, 0.000000, X, Y) && !ellipse(24249.547546, 31079.581207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22471.060000, 31037.088000, 1424.200041, 1424.200041, 0.000000, X, Y) && !ellipse(23450.282837, 30579.461304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24498.499023, 30484.074066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23805.114000, 29972.368000, 1380.264040, 1380.264040, 0.000000, X, Y) && !ellipse(28958.812000, 29331.354000, 1389.328040, 1389.328040, 0.000000, X, Y) && !ellipse(24331.614000, 29777.088000, 8280.528238, 8280.528238, 0.000000, X, Y) && !ellipse(24280.966000, 29435.479200, 1298.864037, 1298.864037, 0.000000, X, Y) && !ellipse(23282.341614, 27456.005188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23235.267944, 27107.452942, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Nov 25 16:38:00 2011] Writing fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src47.gif
[Fri Nov 25 18:49:02 2011] Mean detx,y = (-1161.21, -3406.59) 
[Fri Nov 25 18:49:05 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 18:49:29 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 18:49:30 2011] Setting source spectrum file to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Fri Nov 25 18:49:30 2011] Setting bgd. spectrum file to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Tue Nov 29 02:21:35 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:35 2011] Error reading totcts from fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Tue Nov 29 02:21:40 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:40 2011] Using photon index=1.80, rate=0.004, arf fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src47.arf
[Tue Nov 29 02:21:40 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:40 2011] Updating source flux to 1.2e-14
[Tue Nov 29 02:34:19 2011] Flag c found in src. 47 procflags, skipping spectral fitting