[Thu Nov 24 06:39:24 2011] Detection parameters:
  Position = (330.9, 163.8) = 4 33 33.43 -13 26 34.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 570.0 +/- 36.4
  Background counts = 259.7
  Rate = 0.007 +/- 0.0005

[Thu Nov 24 06:39:26 2011] Off-axis axis estimate = 10.04'
[Thu Nov 24 06:48:36 2011] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 06:48:36 2011] Initial guess for spatial extent in simple fitting = 11.45"
[Thu Nov 24 06:48:36 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.918
[Thu Nov 24 06:48:36 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 11.45"
[Thu Nov 24 11:32:21 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src14.ximg exists
[Thu Nov 24 11:32:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src14.csv
[Thu Nov 24 11:32:21 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu Nov 24 11:32:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src14.csv
[Thu Nov 24 11:32:21 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 11:32:22 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu Nov 24 11:32:22 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Nov 24 11:32:22 2011] Fit fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Nov 25 00:33:17 2011] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 15.077144 pixels away
[Fri Nov 25 00:33:17 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:17 2011] Assessing source extent using major
[Fri Nov 25 00:33:17 2011] Source does appear to be extended
[Fri Nov 25 00:33:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:34:12 2011] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 00:34:12 2011] Initial guess for spatial extent in simple fitting = 11.45"
[Fri Nov 25 00:34:12 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.918
[Fri Nov 25 00:34:12 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 11.45"
[Fri Nov 25 11:10:17 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src14.ximg exists
[Fri Nov 25 11:10:17 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src14.csv
[Fri Nov 25 11:10:17 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Nov 25 11:10:17 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src14.csv
[Fri Nov 25 11:10:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 11:10:20 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Nov 25 11:10:20 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Nov 25 11:10:20 2011] Fit fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Nov 25 16:37:30 2011] Spatial fit model total counts = 2145.500000, observed total counts = 2149.000000
[Fri Nov 25 16:37:30 2011] Offset between fit and detection position for source 21 = 0.033401 pixels
[Fri Nov 25 16:37:30 2011] 2169.661000 total counts/ 1581.100000 bgd. counts: snr = 14.801707
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.033401 pixels
  Position = (330.9, 163.8) = 4 33 33.44 -13 26 33.6
  Extent = 8.3 (7.1-10.3)", rotation angle = 0
  Source counts = 588.6 +/- 46.6
  Background counts = 1581.1
  Rate = 0.009 +/- 0.0007
[Fri Nov 25 16:37:30 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:30 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 16:37:30 2011] Source does appear to be extended
[Fri Nov 25 16:37:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 16:37:59 2011] XMMSAS src. selection expression = ellipse(28738.066400, 14203.870500, 500.042874, 500.042874, 0.000000, X, Y)
[Fri Nov 25 16:37:59 2011] Writing source region out to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src21_src.reg
[Fri Nov 25 16:37:59 2011] Extracting stamp from image fullrun_pn_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (302, 135) - (360, 193)
[Fri Nov 25 16:37:59 2011] XMMSAS bgd. selection expression = annulus(28738.066400, 14203.870500, 833.404790, 1666.809579, X, Y) && !ellipse(25581.478000, 18466.066000, 2973.848086, 2973.848086, 0.000000, X, Y) && !ellipse(24920.014000, 17219.338000, 3186.080092, 2186.432063, 137.838000, X, Y) && !ellipse(24748.196000, 17002.658000, 2645.064076, 2645.064076, 0.000000, X, Y) && !ellipse(28131.306000, 12544.669400, 853.968025, 853.968025, 0.000000, X, Y)
[Fri Nov 25 16:37:59 2011] Writing fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src21.gif
[Fri Nov 25 17:57:34 2011] Mean detx,y = (4214.70, 12304.00) 
[Fri Nov 25 17:57:38 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 17:58:00 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 17:58:01 2011] Setting source spectrum file to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Nov 25 17:58:01 2011] Setting bgd. spectrum file to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Nov 29 02:21:32 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:32 2011] Error reading totcts from fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Nov 29 02:21:39 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:39 2011] Using photon index=1.80, rate=0.00901, arf fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src21.arf
[Tue Nov 29 02:21:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:39 2011] Updating source flux to 5.3e-14