[Thu Nov 24 06:39:24 2011] Detection parameters:
  Position = (420.7, 264.9) = 4 33 6.69 -13 19 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1170.9 +/- 48.5
  Background counts = 298.0
  Rate = 0.03 +/- 0.001

[Thu Nov 24 06:39:26 2011] Off-axis axis estimate = 9.19'
[Thu Nov 24 06:48:36 2011] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 06:48:36 2011] Initial guess for spatial extent in simple fitting = 11.02"
[Thu Nov 24 06:48:36 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.978
[Thu Nov 24 06:48:36 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 11.02"
[Thu Nov 24 11:32:21 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src11.ximg exists
[Thu Nov 24 11:32:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src11.csv
[Thu Nov 24 11:32:21 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Nov 24 11:32:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src11.csv
[Thu Nov 24 11:32:21 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 11:32:22 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Nov 24 11:32:22 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Nov 24 11:32:22 2011] Fit fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Nov 25 00:33:17 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 15.331566 pixels away
[Fri Nov 25 00:33:17 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:17 2011] Assessing source extent using major
[Fri Nov 25 00:33:17 2011] Source does appear to be extended
[Fri Nov 25 00:33:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:34:12 2011] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 00:34:12 2011] Initial guess for spatial extent in simple fitting = 11.02"
[Fri Nov 25 00:34:12 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.978
[Fri Nov 25 00:34:12 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 11.02"
[Fri Nov 25 11:10:17 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src11.ximg exists
[Fri Nov 25 11:10:17 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src11.csv
[Fri Nov 25 11:10:17 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Nov 25 11:10:17 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src11.csv
[Fri Nov 25 11:10:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 11:10:20 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Nov 25 11:10:20 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Nov 25 11:10:20 2011] Fit fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Nov 25 16:37:30 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 15.331566 pixels away
[Fri Nov 25 16:37:30 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:30 2011] Assessing source extent using major
[Fri Nov 25 16:37:30 2011] Source does appear to be extended
[Fri Nov 25 16:37:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 16:37:59 2011] Counts = 1170.947754, rescaling region sizes by 2.000000
[Fri Nov 25 16:37:59 2011] XMMSAS src. selection expression = ellipse(36548.291077, 23001.920074, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Nov 25 16:37:59 2011] Writing source region out to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src16_src.reg
[Fri Nov 25 16:37:59 2011] Extracting stamp from image fullrun_pn_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (346, 190) - (496, 340)
[Fri Nov 25 16:37:59 2011] XMMSAS bgd. selection expression = annulus(36548.291077, 23001.920074, 4350.000000, 8700.000000, X, Y) && !ellipse(27538.831200, 27247.251400, 3493.632101, 3493.632101, 0.000000, X, Y) && !ellipse(27718.160000, 28624.486000, 2537.856073, 2537.856073, 0.000000, X, Y) && !ellipse(29013.566000, 28698.080000, 3805.488110, 3805.488110, 0.000000, X, Y) && !ellipse(31575.994690, 31607.016052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28798.611023, 30397.644897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24086.976400, 26457.460000, 6968.544201, 6968.544201, 0.000000, X, Y) && !ellipse(37839.992035, 21956.218201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35137.469574, 20719.238724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28738.066400, 14203.870500, 666.723832, 666.723832, 0.000000, X, Y) && !ellipse(27351.407654, 24858.454620, 6960.000000, 6960.000000, 0.000000, X, Y) && !ellipse(27652.790649, 32055.530151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38344.057312, 31669.087982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27478.382000, 31708.876000, 4220.088121, 4220.088121, 0.000000, X, Y) && !ellipse(28704.989380, 31367.333282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27819.924744, 31258.113342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41990.130920, 30957.435000, 690.822950, 690.822950, 0.000000, X, Y) && !ellipse(26777.562000, 30825.254000, 1414.488041, 1414.488041, 0.000000, X, Y) && !ellipse(28958.812000, 29331.354000, 1389.328040, 1389.328040, 0.000000, X, Y) && !ellipse(24331.614000, 29777.088000, 8280.528238, 8280.528238, 0.000000, X, Y) && !ellipse(31263.091060, 26859.497000, 812.544023, 812.544023, 0.000000, X, Y) && !ellipse(31528.578522, 25603.400085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30622.140900, 25253.557495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25581.478000, 18466.066000, 2973.848086, 2973.848086, 0.000000, X, Y) && !ellipse(24920.014000, 17219.338000, 3186.080092, 2186.432063, 137.838000, X, Y) && !ellipse(32384.533417, 16793.743393, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Nov 25 16:37:59 2011] Writing fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src16.gif
[Fri Nov 25 17:49:47 2011] Mean detx,y = (9907.18, 2011.95) 
[Fri Nov 25 17:49:53 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 17:51:53 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 17:51:54 2011] Setting source spectrum file to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Nov 25 17:51:54 2011] Setting bgd. spectrum file to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun Nov 27 00:01:49 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Nov 27 00:01:49 2011] rmf not generated due to insufficient counts
[Tue Nov 29 02:21:32 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:32 2011] Error reading totcts from fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Nov 29 02:21:38 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:38 2011] Using photon index=1.80, rate=0.0274, arf fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src16.arf
[Tue Nov 29 02:21:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:38 2011] Updating source flux to 1e-13
[Tue Nov 29 02:34:19 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting