[Thu Nov 24 06:39:23 2011] Detection parameters:
  Position = (281.2, 297.1) = 4 33 48.25 -13 16 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 895.1 +/- 53.7
  Background counts = 1217.2
  Rate = 0.02 +/- 0.001

[Thu Nov 24 06:39:26 2011] Off-axis axis estimate = 1.26'
[Thu Nov 24 06:48:36 2011] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 06:48:36 2011] Initial guess for spatial extent in simple fitting = 7.06"
[Thu Nov 24 06:48:36 2011] source mask rpix=1.6, npix_max = 18, mask sum = 14, frac = 0.777
[Thu Nov 24 06:48:36 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 7.06"
[Thu Nov 24 11:32:21 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src9.ximg exists
[Thu Nov 24 11:32:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src9.csv
[Thu Nov 24 11:32:21 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Nov 24 11:32:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src9.csv
[Thu Nov 24 11:32:21 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 11:32:22 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Nov 24 11:32:22 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Nov 24 11:32:22 2011] Fit fullrun_pn_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Nov 25 00:33:17 2011] Source 13 is offset by 5.320098 and -3.774598 pixels which is larger than
2 X fitted extent = 0.893766 x 0.893766, not incorporating fit results
[Fri Nov 25 00:33:17 2011] Warning, spatial fit 9 centroid is now closest to src. 12
[Fri Nov 25 00:33:17 2011] Spatial fit model total counts = 13403.300000, observed total counts = 13396.000000
[Fri Nov 25 00:33:17 2011] Offset between fit and detection position for source 13 = 2.681824 pixels
[Fri Nov 25 00:33:17 2011] Warning, changing simple spatial fit ID from 9 to 50
[Fri Nov 25 00:33:17 2011] 13294.760000 total counts/ 11393.000000 bgd. counts: snr = 17.817085
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 2.681824 pixels
  Position = (278.5, 296.7) = 4 33 49.05 -13 16 55.7
  Extent = 14.6 (14.5-29.2)", rotation angle = 0
  Source counts = 1901.8 +/- 115.3
  Background counts = 11393.0
  Rate = 0.03 +/- 0.002
[Fri Nov 25 00:33:17 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:17 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 00:33:17 2011] Source does appear to be extended
[Fri Nov 25 00:33:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:33:17 2011] Source is confused with source 22
[Fri Nov 25 00:33:17 2011] Source is confused with source 61
[Fri Nov 25 00:34:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 00:34:12 2011] Initial guess for spatial extent in simple fitting = 14.58"
[Fri Nov 25 00:34:12 2011] source mask rpix=3.4, npix_max = 59, mask sum = 56, frac = 0.943
[Fri Nov 25 00:34:12 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 14.58"
[Fri Nov 25 11:10:17 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src9.ximg exists
[Fri Nov 25 11:10:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src9.csv
[Fri Nov 25 11:10:17 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Nov 25 11:10:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src9.csv
[Fri Nov 25 11:10:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 11:10:20 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Nov 25 11:10:20 2011] fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Nov 25 11:10:20 2011] Fit fullrun_pn_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Nov 25 16:37:30 2011] Warning, spatial fit 9 centroid is now closest to src. 12
[Fri Nov 25 16:37:30 2011] Spatial fit model total counts = 13405.600000, observed total counts = 13396.000000
[Fri Nov 25 16:37:30 2011] Offset between fit and detection position for source 13 = 0.349809 pixels
[Fri Nov 25 16:37:30 2011] Warning, changing simple spatial fit ID from 9 to 46
[Fri Nov 25 16:37:30 2011] 11976.520000 total counts/ 9446.080000 bgd. counts: snr = 26.035758
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.349809 pixels
  Position = (278.3, 296.4) = 4 33 49.12 -13 16 56.8
  Extent = 14.6 (14.4-29.2)" x 14.6 (13.9-29.2)", rotation angle = 0 (360-0) degrees
  Source counts = 2530.4 +/- 109.4
  Background counts = 9446.1
  Rate = 0.04 +/- 0.002
[Fri Nov 25 16:37:30 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:30 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 16:37:30 2011] Source does appear to be extended
[Fri Nov 25 16:37:30 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.49
[Fri Nov 25 16:37:59 2011] Counts = 2530.440000, rescaling region sizes by 2.000000
[Fri Nov 25 16:37:59 2011] XMMSAS src. selection expression = ellipse(24161.698000, 25740.200000, 1750.116050, 1750.116050, 0.000000, X, Y)
[Fri Nov 25 16:37:59 2011] Writing source region out to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src13_src.reg
[Fri Nov 25 16:37:59 2011] Extracting stamp from image fullrun_pn_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (178, 196) - (379, 397)
[Fri Nov 25 16:37:59 2011] XMMSAS bgd. selection expression = annulus(24161.698000, 25740.200000, 5833.720168, 11667.440336, X, Y) && !ellipse(27538.831200, 27247.251400, 3493.632101, 3493.632101, 0.000000, X, Y) && !ellipse(27718.160000, 28624.486000, 2537.856073, 2537.856073, 0.000000, X, Y) && !ellipse(29013.566000, 28698.080000, 3805.488110, 3805.488110, 0.000000, X, Y) && !ellipse(31575.994690, 31607.016052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25044.917328, 31031.400391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28798.611023, 30397.644897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25050.604401, 28290.605682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23571.479614, 28494.432281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24701.906128, 27536.407440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24786.729004, 27105.137756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24086.976400, 26457.460000, 6968.544201, 6968.544201, 0.000000, X, Y) && !ellipse(24723.816000, 23977.320000, 1142.720033, 1142.720033, 0.000000, X, Y) && !ellipse(24313.902802, 24842.909424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36548.291077, 23001.920074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25554.921400, 21033.110200, 335.219210, 335.219210, 0.000000, X, Y) && !ellipse(35137.469574, 20719.238724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17927.993149, 19327.242706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28738.066400, 14203.870500, 666.723832, 666.723832, 0.000000, X, Y) && !ellipse(27351.407654, 24858.454620, 6960.000000, 6960.000000, 0.000000, X, Y) && !ellipse(34633.061798, 35904.709320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31433.170044, 35610.614380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35024.330811, 34493.170959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12819.670319, 33782.114288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27515.897180, 33390.509800, 385.737611, 385.737611, 0.000000, X, Y) && !ellipse(16571.206802, 33447.206238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28240.074880, 32582.323400, 388.109611, 388.109611, 0.000000, X, Y) && !ellipse(27652.790649, 32055.530151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27478.382000, 31708.876000, 4220.088121, 4220.088121, 0.000000, X, Y) && !ellipse(26569.063446, 31519.280609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28704.989380, 31367.333282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27819.924744, 31258.113342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26352.598000, 31246.664000, 1404.480040, 1404.480040, 0.000000, X, Y) && !ellipse(24382.776917, 13282.001190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24249.547546, 31079.581207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22471.060000, 31037.088000, 1424.200041, 1424.200041, 0.000000, X, Y) && !ellipse(26777.562000, 30825.254000, 1414.488041, 1414.488041, 0.000000, X, Y) && !ellipse(23450.282837, 30579.461304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24498.499023, 30484.074066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23805.114000, 29972.368000, 1380.264040, 1380.264040, 0.000000, X, Y) && !ellipse(28958.812000, 29331.354000, 1389.328040, 1389.328040, 0.000000, X, Y) && !ellipse(15031.280518, 30042.024963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.614000, 29777.088000, 8280.528238, 8280.528238, 0.000000, X, Y) && !ellipse(24280.966000, 29435.479200, 1298.864037, 1298.864037, 0.000000, X, Y) && !ellipse(23282.341614, 27456.005188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23235.267944, 27107.452942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31263.091060, 26859.497000, 812.544023, 812.544023, 0.000000, X, Y) && !ellipse(31528.578522, 25603.400085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23918.335297, 25361.356995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23477.738495, 24750.161285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30622.140900, 25253.557495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20973.615800, 24831.144600, 318.684809, 318.684809, 0.000000, X, Y) && !ellipse(23277.251600, 24289.296000, 1164.720034, 1164.720034, 0.000000, X, Y) && !ellipse(26427.132000, 22287.236000, 1316.040038, 1316.040038, 0.000000, X, Y) && !ellipse(26041.017944, 21605.241913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26107.481293, 20946.591537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26159.136000, 19257.498000, 1511.728043, 1511.728043, 0.000000, X, Y) && !ellipse(25581.478000, 18466.066000, 2973.848086, 2973.848086, 0.000000, X, Y) && !ellipse(25208.858400, 17937.844000, 1327.136038, 1327.136038, 0.000000, X, Y) && !ellipse(24920.014000, 17219.338000, 3186.080092, 2186.432063, 137.838000, X, Y) && !ellipse(24504.459564, 17351.712402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24748.196000, 17002.658000, 2645.064076, 2645.064076, 0.000000, X, Y) && !ellipse(32384.533417, 16793.743393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25719.483276, 16760.586060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25009.750000, 16209.094600, 1639.040047, 1053.072030, 302.148000, X, Y) && !ellipse(24946.309540, 15427.379028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25119.544600, 14960.368600, 1774.424051, 1774.424051, 0.000000, X, Y) && !ellipse(24742.953660, 14877.870400, 1928.688055, 550.272016, 112.541032, X, Y) && !ellipse(24545.917847, 13953.916092, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Nov 25 16:37:59 2011] Writing fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src13.gif
[Fri Nov 25 17:40:18 2011] Mean detx,y = (-2334.73, 1843.88) 
[Fri Nov 25 17:40:31 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 17:43:02 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 17:43:03 2011] Setting source spectrum file to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Nov 25 17:43:03 2011] Setting bgd. spectrum file to fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Nov 29 02:21:32 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:32 2011] Error reading totcts from fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Nov 29 02:21:38 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:38 2011] Using photon index=1.80, rate=0.0387, arf fullrun_pn_xmm0506260401_pi300-10000_pass1_cl_src13.arf
[Tue Nov 29 02:21:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:38 2011] Updating source flux to 1e-13
[Tue Nov 29 02:34:19 2011] Flag b found in src. 13 procflags, skipping spectral fitting
[Tue Nov 29 02:34:19 2011] Flag c found in src. 13 procflags, skipping spectral fitting