[Thu Nov 24 06:40:21 2011] Detection parameters:
  Position = (302.4, 348.2) = 4 33 41.92 -13 13 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 560.5 +/- 46.4
  Background counts = 614.8
  Rate = 0.01 +/- 0.0008

[Thu Nov 24 06:40:22 2011] Off-axis axis estimate = 3.62'
[Thu Nov 24 16:54:22 2011] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:54:22 2011] Initial guess for spatial extent in simple fitting = 8.24"
[Thu Nov 24 16:54:22 2011] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.742
[Thu Nov 24 16:54:22 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 8.24"
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src9.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src9.csv
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src9.csv
[Fri Nov 25 00:32:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 00:32:50 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Nov 25 00:32:50 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Nov 25 00:32:50 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Nov 25 00:33:45 2011] Source 9 is offset by 3.030536 and -1.051884 pixels which is larger than
2 X fitted extent = 2.213324 x 2.213324, not incorporating fit results
[Fri Nov 25 00:33:45 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:45 2011] Assessing source extent using major
[Fri Nov 25 00:33:45 2011] Source does appear to be extended
[Fri Nov 25 00:33:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:33:45 2011] Source is confused with source 8
[Fri Nov 25 14:02:34 2011] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 14:02:34 2011] Initial guess for spatial extent in simple fitting = 8.24"
[Fri Nov 25 14:02:34 2011] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.742
[Fri Nov 25 14:02:34 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 8.24"
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src8.ximg exists
[Fri Nov 25 16:37:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src8.csv
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Nov 25 16:37:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src8.csv
[Fri Nov 25 16:37:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Nov 25 16:37:14 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Nov 25 16:37:43 2011] Source 9 is offset by 3.107456 and -1.100217 pixels which is larger than
2 X fitted extent = 2.283563 x 2.283563, not incorporating fit results
[Fri Nov 25 16:37:43 2011] Source 9 is offset by 3.257157 and -1.175606 pixels which is larger than
2 X fitted extent = 2.505425 x 2.505425, not incorporating fit results
[Fri Nov 25 16:37:43 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:43 2011] Assessing source extent using major
[Fri Nov 25 16:37:43 2011] Source does appear to be extended
[Fri Nov 25 16:37:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 20:32:28 2011] XMMSAS src. selection expression = ellipse(26262.768646, 30247.094116, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing source region out to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src9_src.reg
[Mon Nov 28 20:32:28 2011] Extracting stamp from image fullrun_mos2_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (265, 311) - (340, 386)
[Mon Nov 28 20:32:28 2011] XMMSAS bgd. selection expression = annulus(26262.768646, 30247.094116, 1087.500000, 2175.000000, X, Y) && !ellipse(27350.455600, 27320.263200, 5585.592161, 5585.592161, 0.000000, X, Y) && !ellipse(28493.740000, 26667.064000, 3599.640104, 3599.640104, 0.000000, X, Y) && !ellipse(25657.828186, 28064.567108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.308000, 28582.360000, 1756.944051, 1756.944051, 0.000000, X, Y) && !ellipse(25453.349600, 29091.024000, 1278.376037, 1278.376037, 0.000000, X, Y) && !ellipse(26003.929840, 29433.351532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25127.054000, 31398.154600, 318.108009, 318.108009, 0.000000, X, Y) && !ellipse(26280.451141, 30127.808960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25351.590000, 29379.698000, 1225.608035, 1225.608035, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src9.gif
[Mon Nov 28 21:20:11 2011] Mean detx,y = (1790.41, 2636.55) 
[Mon Nov 28 21:20:14 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 21:20:39 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 21:20:39 2011] Setting source spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Nov 28 21:20:39 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Nov 29 00:20:04 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 00:20:04 2011] rmf not generated due to insufficient counts
[Tue Nov 29 02:21:47 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:47 2011] Error reading totcts from fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Nov 29 02:21:49 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:49 2011] Using photon index=1.80, rate=0.0101, arf fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src9.arf
[Tue Nov 29 02:21:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:49 2011] Updating source flux to 1.3e-13
[Tue Nov 29 02:27:28 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting