[Thu Nov 24 06:40:22 2011] Detection parameters:
  Position = (312.7, 111.9) = 4 33 38.84 -13 30 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.7 +/- 14.6
  Background counts = 48.7
  Rate = 0.0009 +/- 0.0002

[Thu Nov 24 06:40:22 2011] Off-axis axis estimate = 13.56'
[Thu Nov 24 16:54:22 2011] Using EEF radius (= 13.21 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:54:22 2011] Initial guess for spatial extent in simple fitting = 13.21"
[Thu Nov 24 16:54:22 2011] source mask rpix=3.0, npix_max = 50, mask sum = 36, frac = 0.719
[Thu Nov 24 16:54:22 2011] Giving source the simple spatial ID 51 for pass 0, mean size = 13.21"
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src51.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src51.csv
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src51_1.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src51.csv
[Fri Nov 25 00:32:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 00:32:50 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Fri Nov 25 00:32:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src51.csv
[Fri Nov 25 00:32:50 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Fri Nov 25 00:32:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src51.csv
[Fri Nov 25 00:32:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 00:33:45 2011] Spatial fit model total counts = 399.290000, observed total counts = 466.000000
[Fri Nov 25 00:33:45 2011] Poor agreement between spatial fit and data for source 52
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Nov 25 00:33:45 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:45 2011] Assessing source extent using major
[Fri Nov 25 00:33:45 2011] Source does appear to be extended
[Fri Nov 25 00:33:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:33:45 2011] Deleting source due to low Poisson probability 0.8