[Thu Nov 24 06:40:21 2011] Detection parameters:
  Position = (464.4, 390.2) = 4 32 53.67 -13 10 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 303.3 +/- 24.9
  Background counts = 69.8
  Rate = 0.004 +/- 0.0003

[Thu Nov 24 06:40:22 2011] Off-axis axis estimate = 13.75'
[Thu Nov 24 16:54:22 2011] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:54:22 2011] Initial guess for spatial extent in simple fitting = 13.30"
[Thu Nov 24 16:54:22 2011] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.967
[Thu Nov 24 16:54:22 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 13.30"
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src27.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src27.csv
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src27.csv
[Fri Nov 25 00:32:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 00:32:50 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Nov 25 00:32:50 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Nov 25 00:32:50 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Nov 25 00:33:45 2011] Spatial fit model total counts = 996.365000, observed total counts = 996.000000
[Fri Nov 25 00:33:45 2011] Offset between fit and detection position for source 5 = 0.165905 pixels
[Fri Nov 25 00:33:45 2011] 991.346000 total counts/ 788.035000 bgd. counts: snr = 7.242494
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.165905 pixels
  Position = (464.3, 390.3) = 4 32 53.71 -13 10 8.1
  Extent = 6.5 (5.6-7.7)", rotation angle = 0
  Source counts = 203.3 +/- 31.5
  Background counts = 788.0
  Rate = 0.003 +/- 0.0004
[Fri Nov 25 00:33:45 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:45 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 00:33:45 2011] Source does appear to be extended
[Fri Nov 25 00:33:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 14:02:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 14:02:34 2011] Initial guess for spatial extent in simple fitting = 6.48"
[Fri Nov 25 14:02:34 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.010
[Fri Nov 25 14:02:34 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 6.48"
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src26.ximg exists
[Fri Nov 25 16:37:13 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src26.csv
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri Nov 25 16:37:13 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src26.csv
[Fri Nov 25 16:37:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Nov 25 16:37:14 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Fri Nov 25 16:37:43 2011] Spatial fit model total counts = 823.999000, observed total counts = 824.000000
[Fri Nov 25 16:37:43 2011] Offset between fit and detection position for source 5 = 0.007425 pixels
[Fri Nov 25 16:37:43 2011] 816.357000 total counts/ 609.697000 bgd. counts: snr = 8.369498
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.007425 pixels
  Position = (464.3, 390.3) = 4 32 53.71 -13 10 8.1
  Extent = 6.5 (5.6-7.8)", rotation angle = 0
  Source counts = 206.7 +/- 28.6
  Background counts = 609.7
  Rate = 0.003 +/- 0.0004
[Fri Nov 25 16:37:43 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:43 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 16:37:43 2011] Source does appear to be extended
[Fri Nov 25 16:37:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 20:32:28 2011] XMMSAS src. selection expression = ellipse(40346.575000, 33908.262400, 392.224211, 392.224211, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing source region out to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src5_src.reg
[Mon Nov 28 20:32:28 2011] Extracting stamp from image fullrun_mos2_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (442, 368) - (487, 413)
[Mon Nov 28 20:32:28 2011] XMMSAS bgd. selection expression = annulus(40346.575000, 33908.262400, 653.707019, 1307.414038, X, Y) && !ellipse(41641.273580, 34609.693600, 448.492013, 448.492013, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src5.gif
[Mon Nov 28 21:33:17 2011] Mean detx,y = (-11084.16, 9379.22) 
[Mon Nov 28 21:33:20 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 21:33:30 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 21:33:30 2011] Setting source spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Nov 28 21:33:30 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Nov 29 02:21:48 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:48 2011] Error reading totcts from fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Nov 29 02:21:50 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:50 2011] Using photon index=1.80, rate=0.0027, arf fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src5.arf
[Tue Nov 29 02:21:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:50 2011] Updating source flux to 8.3e-14