[Thu Nov 24 06:40:21 2011] Detection parameters:
  Position = (291.0, 340.9) = 4 33 45.34 -13 13 43.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 231.3 +/- 37.9
  Background counts = 611.8
  Rate = 0.003 +/- 0.0005

[Thu Nov 24 06:40:22 2011] Off-axis axis estimate = 3.12'
[Thu Nov 24 16:54:22 2011] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:54:22 2011] Initial guess for spatial extent in simple fitting = 7.99"
[Thu Nov 24 16:54:22 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.733
[Thu Nov 24 16:54:22 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 7.99"
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src30.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src30.csv
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src30_1.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src30.csv
[Fri Nov 25 00:32:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 00:32:50 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Fri Nov 25 00:32:50 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Nov 25 00:32:50 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Fri Nov 25 00:33:45 2011] Spatial fit model total counts = 15699.700000, observed total counts = 15654.000000
[Fri Nov 25 00:33:45 2011] Offset between fit and detection position for source 32 = 2.781543 pixels
[Fri Nov 25 00:33:45 2011] Warning, changing simple spatial fit ID from 30 to 4
[Fri Nov 25 00:33:45 2011] 15560.310000 total counts/ 14000.500000 bgd. counts: snr = 13.182565
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 2.781543 pixels
  Position = (292.0, 338.3) = 4 33 45.04 -13 13 54.8
  Extent = 15.3 (15.3-15.3)", rotation angle = 0
  Source counts = 1559.8 +/- 124.7
  Background counts = 14000.5
  Rate = 0.02 +/- 0.002
[Fri Nov 25 00:33:45 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:45 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 00:33:45 2011] Source does appear to be extended
[Fri Nov 25 00:33:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:33:45 2011] Source is confused with source 11
[Fri Nov 25 14:02:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 14:02:34 2011] Initial guess for spatial extent in simple fitting = 15.32"
[Fri Nov 25 14:02:34 2011] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.989
[Fri Nov 25 14:02:34 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 15.32"
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src29.ximg exists
[Fri Nov 25 16:37:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src29.csv
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri Nov 25 16:37:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src29.csv
[Fri Nov 25 16:37:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Nov 25 16:37:14 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Fri Nov 25 16:37:43 2011] Warning, spatial fit 29 centroid is now closest to src. 11
[Fri Nov 25 16:37:43 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:43 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 16:37:43 2011] Source does appear to be extended
[Fri Nov 25 16:37:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 20:32:28 2011] Counts = 1559.810000, rescaling region sizes by 2.000000
[Mon Nov 28 20:32:28 2011] XMMSAS src. selection expression = ellipse(25351.590000, 29379.698000, 1838.412053, 1838.412053, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing source region out to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src32_src.reg
[Mon Nov 28 20:32:28 2011] Extracting stamp from image fullrun_mos2_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (186, 233) - (398, 444)
[Mon Nov 28 20:32:29 2011] XMMSAS bgd. selection expression = annulus(25351.590000, 29379.698000, 6128.040176, 12256.080353, X, Y) && !ellipse(27350.455600, 27320.263200, 5585.592161, 5585.592161, 0.000000, X, Y) && !ellipse(28493.740000, 26667.064000, 3599.640104, 3599.640104, 0.000000, X, Y) && !ellipse(25657.828186, 28064.567108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.308000, 28582.360000, 1756.944051, 1756.944051, 0.000000, X, Y) && !ellipse(25453.349600, 29091.024000, 1278.376037, 1278.376037, 0.000000, X, Y) && !ellipse(26739.708000, 24253.574000, 1139.024033, 1139.024033, 0.000000, X, Y) && !ellipse(26262.768646, 30247.094116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25544.642260, 21047.139800, 238.811207, 238.811207, 0.000000, X, Y) && !ellipse(26003.929840, 29433.351532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36567.850677, 23002.076721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25868.409180, 23968.560486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25896.863129, 21595.074478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28393.296000, 23490.532000, 1274.776037, 1274.776037, 0.000000, X, Y) && !ellipse(27650.220000, 23336.218000, 889.560026, 889.560026, 0.000000, X, Y) && !ellipse(26471.623200, 22886.364000, 1213.600035, 1213.600035, 0.000000, X, Y) && !ellipse(25127.054000, 31398.154600, 318.108009, 318.108009, 0.000000, X, Y) && !ellipse(35120.750854, 20731.750549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26280.451141, 30127.808960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27546.838000, 23067.972000, 1275.624037, 1275.624037, 0.000000, X, Y) && !ellipse(24264.561737, 27088.748260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29938.441650, 25872.325348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30440.076000, 24786.428000, 1295.152037, 1295.152037, 0.000000, X, Y) && !ellipse(28112.017792, 22946.663605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17946.249130, 19437.397217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29441.762665, 29060.797821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29689.901703, 24585.376892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23811.619049, 25281.926483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23660.409821, 27009.631042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27468.616000, 22591.256000, 892.264026, 892.264026, 0.000000, X, Y)
[Mon Nov 28 20:32:29 2011] Writing fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src32.gif
[Mon Nov 28 21:35:49 2011] Mean detx,y = (2058.14, 1333.42) 
[Mon Nov 28 21:35:55 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 21:41:54 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 21:41:55 2011] Setting source spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Nov 28 21:41:55 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Tue Nov 29 02:21:48 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:48 2011] Error reading totcts from fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Tue Nov 29 02:21:51 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:51 2011] Using photon index=1.80, rate=0.0204, arf fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src32.arf
[Tue Nov 29 02:21:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:51 2011] Updating source flux to 2e-13
[Tue Nov 29 02:27:28 2011] Flag c found in src. 32 procflags, skipping spectral fitting