[Thu Nov 24 06:40:21 2011] Detection parameters:
  Position = (295.5, 323.1) = 4 33 43.99 -13 15 0.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1606.8 +/- 62.8
  Background counts = 728.2
  Rate = 0.02 +/- 0.0009

[Thu Nov 24 06:40:22 2011] Off-axis axis estimate = 1.80'
[Thu Nov 24 16:54:22 2011] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:54:22 2011] Initial guess for spatial extent in simple fitting = 7.33"
[Thu Nov 24 16:54:22 2011] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.733
[Thu Nov 24 16:54:22 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.33"
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src3.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src3.csv
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src3.csv
[Fri Nov 25 00:32:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Nov 25 00:32:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 00:33:45 2011] Warning, spatial fit 3 centroid is now closest to src. 12
[Fri Nov 25 00:33:45 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:45 2011] Assessing source extent using major
[Fri Nov 25 00:33:45 2011] Source does appear to be extended
[Fri Nov 25 00:33:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 14:02:34 2011] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 14:02:34 2011] Initial guess for spatial extent in simple fitting = 7.33"
[Fri Nov 25 14:02:34 2011] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.733
[Fri Nov 25 14:02:34 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.33"
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src3.ximg exists
[Fri Nov 25 16:37:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src3.csv
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Nov 25 16:37:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src3.csv
[Fri Nov 25 16:37:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Nov 25 16:37:14 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Nov 25 16:37:43 2011] Warning, spatial fit 3 centroid is now closest to src. 12
[Fri Nov 25 16:37:43 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:43 2011] Assessing source extent using major
[Fri Nov 25 16:37:43 2011] Source does appear to be extended
[Fri Nov 25 16:37:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 16:37:43 2011] Source is confused with source 11
[Mon Nov 28 20:32:28 2011] Counts = 1606.762573, rescaling region sizes by 2.000000
[Mon Nov 28 20:32:28 2011] XMMSAS src. selection expression = ellipse(25657.828186, 28064.567108, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing source region out to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src3_src.reg
[Mon Nov 28 20:32:28 2011] Extracting stamp from image fullrun_mos2_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (220, 248) - (370, 398)
[Mon Nov 28 20:32:28 2011] XMMSAS bgd. selection expression = annulus(25657.828186, 28064.567108, 4350.000000, 8700.000000, X, Y) && !ellipse(27350.455600, 27320.263200, 5585.592161, 5585.592161, 0.000000, X, Y) && !ellipse(28493.740000, 26667.064000, 3599.640104, 3599.640104, 0.000000, X, Y) && !ellipse(25648.308000, 28582.360000, 1756.944051, 1756.944051, 0.000000, X, Y) && !ellipse(25453.349600, 29091.024000, 1278.376037, 1278.376037, 0.000000, X, Y) && !ellipse(26739.708000, 24253.574000, 1139.024033, 1139.024033, 0.000000, X, Y) && !ellipse(26262.768646, 30247.094116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25544.642260, 21047.139800, 238.811207, 238.811207, 0.000000, X, Y) && !ellipse(26003.929840, 29433.351532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25868.409180, 23968.560486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25896.863129, 21595.074478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28393.296000, 23490.532000, 1274.776037, 1274.776037, 0.000000, X, Y) && !ellipse(27650.220000, 23336.218000, 889.560026, 889.560026, 0.000000, X, Y) && !ellipse(26471.623200, 22886.364000, 1213.600035, 1213.600035, 0.000000, X, Y) && !ellipse(25127.054000, 31398.154600, 318.108009, 318.108009, 0.000000, X, Y) && !ellipse(35120.750854, 20731.750549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26280.451141, 30127.808960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27546.838000, 23067.972000, 1275.624037, 1275.624037, 0.000000, X, Y) && !ellipse(24264.561737, 27088.748260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29938.441650, 25872.325348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30440.076000, 24786.428000, 1295.152037, 1295.152037, 0.000000, X, Y) && !ellipse(28112.017792, 22946.663605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25351.590000, 29379.698000, 1225.608035, 1225.608035, 0.000000, X, Y) && !ellipse(17946.249130, 19437.397217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29441.762665, 29060.797821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29689.901703, 24585.376892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23811.619049, 25281.926483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23660.409821, 27009.631042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27468.616000, 22591.256000, 892.264026, 892.264026, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src3.gif
[Mon Nov 28 20:59:16 2011] Mean detx,y = (1587.93, 349.17) 
[Mon Nov 28 20:59:22 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 21:04:45 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 21:04:46 2011] Setting source spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Nov 28 21:04:46 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Nov 28 22:55:41 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Nov 28 22:55:41 2011] rmf not generated due to insufficient counts
[Tue Nov 29 02:21:47 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:47 2011] Error reading totcts from fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Nov 29 02:21:49 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:49 2011] Using photon index=1.80, rate=0.0242, arf fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src3.arf
[Tue Nov 29 02:21:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:49 2011] Updating source flux to 2.3e-13
[Tue Nov 29 02:27:28 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting