[Thu Nov 24 06:40:21 2011] Detection parameters:
  Position = (404.2, 238.9) = 4 33 11.57 -13 21 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 266.7 +/- 25.6
  Background counts = 118.2
  Rate = 0.005 +/- 0.0005

[Thu Nov 24 06:40:22 2011] Off-axis axis estimate = 8.80'
[Thu Nov 24 16:54:22 2011] Using EEF radius (= 10.83 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:54:22 2011] Initial guess for spatial extent in simple fitting = 10.83"
[Thu Nov 24 16:54:22 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.007
[Thu Nov 24 16:54:22 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 10.83"
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src20.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src20.csv
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src20.csv
[Fri Nov 25 00:32:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 00:32:50 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Nov 25 00:32:50 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Nov 25 00:32:50 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Nov 25 00:33:45 2011] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 12.578784 pixels away
[Fri Nov 25 00:33:45 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:45 2011] Assessing source extent using major
[Fri Nov 25 00:33:45 2011] Source does appear to be extended
[Fri Nov 25 00:33:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 14:02:34 2011] Using EEF radius (= 10.83 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 14:02:34 2011] Initial guess for spatial extent in simple fitting = 10.83"
[Fri Nov 25 14:02:34 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.007
[Fri Nov 25 14:02:34 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 10.83"
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src19.ximg exists
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Nov 25 16:37:13 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src19 appears to have run properly
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Nov 25 16:37:14 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Nov 25 16:37:43 2011] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 14.754990 pixels away
[Fri Nov 25 16:37:43 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:43 2011] Assessing source extent using major
[Fri Nov 25 16:37:43 2011] Source does appear to be extended
[Fri Nov 25 16:37:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 20:32:28 2011] XMMSAS src. selection expression = ellipse(35120.750854, 20731.750549, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing source region out to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src28_src.reg
[Mon Nov 28 20:32:28 2011] Extracting stamp from image fullrun_mos2_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (367, 201) - (442, 276)
[Mon Nov 28 20:32:28 2011] XMMSAS bgd. selection expression = annulus(35120.750854, 20731.750549, 1087.500000, 2175.000000, X, Y) && !ellipse(36567.850677, 23002.076721, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src28.gif
[Mon Nov 28 21:28:46 2011] Mean detx,y = (-8912.01, -4620.92) 
[Mon Nov 28 21:28:48 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 21:29:07 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 21:29:08 2011] Setting source spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Mon Nov 28 21:29:08 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue Nov 29 01:11:40 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 01:11:40 2011] rmf not generated due to insufficient counts
[Tue Nov 29 02:21:48 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:48 2011] Error reading totcts from fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Nov 29 02:21:50 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:50 2011] Using photon index=1.80, rate=0.00533, arf fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src28.arf
[Tue Nov 29 02:21:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:50 2011] Updating source flux to 8.7e-14
[Tue Nov 29 02:27:28 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting