[Thu Nov 24 06:40:21 2011] Detection parameters:
  Position = (298.2, 248.8) = 4 33 43.17 -13 20 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 402.2 +/- 31.8
  Background counts = 281.1
  Rate = 0.007 +/- 0.0006

[Thu Nov 24 06:40:22 2011] Off-axis axis estimate = 3.60'
[Thu Nov 24 16:54:22 2011] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:54:22 2011] Initial guess for spatial extent in simple fitting = 8.23"
[Thu Nov 24 16:54:22 2011] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.743
[Thu Nov 24 16:54:22 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 8.23"
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src15.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src15.csv
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src15.csv
[Fri Nov 25 00:32:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 00:32:50 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Nov 25 00:32:50 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Nov 25 00:32:50 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Nov 25 00:33:45 2011] Warning, spatial fit 15 centroid is now closest to src. 25
[Fri Nov 25 00:33:45 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:45 2011] Assessing source extent using major
[Fri Nov 25 00:33:45 2011] Source does appear to be extended
[Fri Nov 25 00:33:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 14:02:34 2011] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 14:02:34 2011] Initial guess for spatial extent in simple fitting = 8.23"
[Fri Nov 25 14:02:34 2011] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.743
[Fri Nov 25 14:02:34 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 8.23"
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src14.ximg exists
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Nov 25 16:37:13 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src14 appears to have run properly
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Nov 25 16:37:14 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Nov 25 16:37:43 2011] Source 26 is offset by 4.046289 and 6.343408 pixels which is larger than
2 X fitted extent = 1.291347 x 1.675995, not incorporating fit results
[Fri Nov 25 16:37:43 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:43 2011] Assessing source extent using major
[Fri Nov 25 16:37:43 2011] Source does appear to be extended
[Fri Nov 25 16:37:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 16:37:43 2011] Source is confused with source 27
[Mon Nov 28 20:32:28 2011] XMMSAS src. selection expression = ellipse(25896.863129, 21595.074478, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing source region out to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src26_src.reg
[Mon Nov 28 20:32:28 2011] Extracting stamp from image fullrun_mos2_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (261, 211) - (336, 286)
[Mon Nov 28 20:32:28 2011] XMMSAS bgd. selection expression = annulus(25896.863129, 21595.074478, 1087.500000, 2175.000000, X, Y) && !ellipse(27350.455600, 27320.263200, 5585.592161, 5585.592161, 0.000000, X, Y) && !ellipse(28493.740000, 26667.064000, 3599.640104, 3599.640104, 0.000000, X, Y) && !ellipse(26739.708000, 24253.574000, 1139.024033, 1139.024033, 0.000000, X, Y) && !ellipse(25544.642260, 21047.139800, 238.811207, 238.811207, 0.000000, X, Y) && !ellipse(25868.409180, 23968.560486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28393.296000, 23490.532000, 1274.776037, 1274.776037, 0.000000, X, Y) && !ellipse(27650.220000, 23336.218000, 889.560026, 889.560026, 0.000000, X, Y) && !ellipse(26471.623200, 22886.364000, 1213.600035, 1213.600035, 0.000000, X, Y) && !ellipse(27546.838000, 23067.972000, 1275.624037, 1275.624037, 0.000000, X, Y) && !ellipse(28112.017792, 22946.663605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27468.616000, 22591.256000, 892.264026, 892.264026, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src26.gif
[Mon Nov 28 21:24:22 2011] Mean detx,y = (243.98, -5849.36) 
[Mon Nov 28 21:24:25 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 21:24:57 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 21:24:57 2011] Setting source spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Nov 28 21:24:57 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue Nov 29 00:31:49 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 00:31:49 2011] rmf not generated due to insufficient counts
[Tue Nov 29 02:21:47 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:47 2011] Error reading totcts from fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue Nov 29 02:21:50 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:50 2011] Using photon index=1.80, rate=0.00734, arf fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src26.arf
[Tue Nov 29 02:21:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:50 2011] Updating source flux to 9.1e-14
[Tue Nov 29 02:27:28 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting