[Thu Nov 24 06:40:21 2011] Detection parameters:
  Position = (299.4, 332.4) = 4 33 42.81 -13 14 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1357.0 +/- 58.9
  Background counts = 621.0
  Rate = 0.02 +/- 0.001

[Thu Nov 24 06:40:22 2011] Off-axis axis estimate = 2.47'
[Thu Nov 24 16:54:22 2011] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:54:22 2011] Initial guess for spatial extent in simple fitting = 7.66"
[Thu Nov 24 16:54:22 2011] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.733
[Thu Nov 24 16:54:22 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 7.66"
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src4.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src4.csv
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src4.csv
[Fri Nov 25 00:32:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Nov 25 00:32:50 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Nov 25 00:33:45 2011] Warning, spatial fit 4 centroid is now closest to src. 32
[Fri Nov 25 00:33:45 2011] Source 11 is offset by -6.389682 and -1.419305 pixels which is larger than
2 X fitted extent = 5.384690 x 5.384690, not incorporating fit results
[Fri Nov 25 00:33:45 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:45 2011] Assessing source extent using major
[Fri Nov 25 00:33:45 2011] Source does appear to be extended
[Fri Nov 25 00:33:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:33:45 2011] Source is confused with source 12
[Fri Nov 25 00:33:45 2011] Source is confused with source 10
[Fri Nov 25 00:33:45 2011] Source is confused with source 32
[Fri Nov 25 14:02:34 2011] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 14:02:34 2011] Initial guess for spatial extent in simple fitting = 7.66"
[Fri Nov 25 14:02:34 2011] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.733
[Fri Nov 25 14:02:34 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 7.66"
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src4.ximg exists
[Fri Nov 25 16:37:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src4.csv
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Nov 25 16:37:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src4.csv
[Fri Nov 25 16:37:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Nov 25 16:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Nov 25 16:37:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Nov 25 16:37:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 16:37:43 2011] Warning, spatial fit 4 centroid is now closest to src. 10
[Fri Nov 25 16:37:43 2011] Source 11 is offset by -6.314486 and -1.385695 pixels which is larger than
2 X fitted extent = 5.313793 x 5.313793, not incorporating fit results
[Fri Nov 25 16:37:43 2011] Spatial fit model total counts = 15056.700000, observed total counts = 15055.000000
[Fri Nov 25 16:37:43 2011] Offset between fit and detection position for source 11 = 5.260155 pixels
[Fri Nov 25 16:37:43 2011] Warning, changing simple spatial fit ID from 4 to 29
[Fri Nov 25 16:37:43 2011] 14174.960000 total counts/ 12344.400000 bgd. counts: snr = 16.475893
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 5.260155 pixels
  Position = (295.4, 329.1) = 4 33 44.02 -13 14 34.7
  Extent = 22.0 (15.2-29.6)", rotation angle = 0
  Source counts = 1830.6 +/- 119.1
  Background counts = 12344.4
  Rate = 0.02 +/- 0.002
[Fri Nov 25 16:37:43 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:43 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 16:37:43 2011] Source does appear to be extended
[Fri Nov 25 16:37:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 20:32:28 2011] Counts = 1830.560000, rescaling region sizes by 2.000000
[Mon Nov 28 20:32:28 2011] XMMSAS src. selection expression = ellipse(25648.308000, 28582.360000, 2635.416076, 2635.416076, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing source region out to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src11_src.reg
[Mon Nov 28 20:32:28 2011] Extracting stamp from image fullrun_mos2_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (144, 178) - (447, 481)
[Mon Nov 28 20:32:28 2011] XMMSAS bgd. selection expression = annulus(25648.308000, 28582.360000, 8784.720253, 17569.440506, X, Y) && !ellipse(27350.455600, 27320.263200, 5585.592161, 5585.592161, 0.000000, X, Y) && !ellipse(28493.740000, 26667.064000, 3599.640104, 3599.640104, 0.000000, X, Y) && !ellipse(25657.828186, 28064.567108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25453.349600, 29091.024000, 1278.376037, 1278.376037, 0.000000, X, Y) && !ellipse(26739.708000, 24253.574000, 1139.024033, 1139.024033, 0.000000, X, Y) && !ellipse(26262.768646, 30247.094116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25544.642260, 21047.139800, 238.811207, 238.811207, 0.000000, X, Y) && !ellipse(26003.929840, 29433.351532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36567.850677, 23002.076721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41641.273580, 34609.693600, 448.492013, 448.492013, 0.000000, X, Y) && !ellipse(25868.409180, 23968.560486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25896.863129, 21595.074478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28393.296000, 23490.532000, 1274.776037, 1274.776037, 0.000000, X, Y) && !ellipse(27650.220000, 23336.218000, 889.560026, 889.560026, 0.000000, X, Y) && !ellipse(26471.623200, 22886.364000, 1213.600035, 1213.600035, 0.000000, X, Y) && !ellipse(25127.054000, 31398.154600, 318.108009, 318.108009, 0.000000, X, Y) && !ellipse(35120.750854, 20731.750549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26280.451141, 30127.808960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27546.838000, 23067.972000, 1275.624037, 1275.624037, 0.000000, X, Y) && !ellipse(24264.561737, 27088.748260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29938.441650, 25872.325348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40346.575000, 33908.262400, 522.965615, 522.965615, 0.000000, X, Y) && !ellipse(30440.076000, 24786.428000, 1295.152037, 1295.152037, 0.000000, X, Y) && !ellipse(28112.017792, 22946.663605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25351.590000, 29379.698000, 1225.608035, 1225.608035, 0.000000, X, Y) && !ellipse(17946.249130, 19437.397217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29441.762665, 29060.797821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29689.901703, 24585.376892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23811.619049, 25281.926483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43312.395050, 23589.095734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23660.409821, 27009.631042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27468.616000, 22591.256000, 892.264026, 892.264026, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src11.gif
[Mon Nov 28 21:05:36 2011] Mean detx,y = (1024.63, 457.22) 
[Mon Nov 28 21:05:45 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 21:18:15 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 21:18:15 2011] Setting source spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Nov 28 21:18:15 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Nov 29 02:21:47 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:47 2011] Error reading totcts from fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Nov 29 02:21:49 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:49 2011] Using photon index=1.80, rate=0.0239, arf fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src11.arf
[Tue Nov 29 02:21:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:49 2011] Updating source flux to 2.2e-13
[Tue Nov 29 02:27:28 2011] Flag b found in src. 11 procflags, skipping spectral fitting
[Tue Nov 29 02:27:28 2011] Flag c found in src. 11 procflags, skipping spectral fitting