[Thu Nov 24 06:40:21 2011] Detection parameters:
  Position = (299.5, 338.9) = 4 33 42.81 -13 13 54.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 560.5 +/- 42.6
  Background counts = 683.8
  Rate = 0.009 +/- 0.0007

[Thu Nov 24 06:40:22 2011] Off-axis axis estimate = 2.93'
[Thu Nov 24 16:54:22 2011] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:54:22 2011] Initial guess for spatial extent in simple fitting = 7.89"
[Thu Nov 24 16:54:22 2011] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.560
[Thu Nov 24 16:54:22 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 7.89"
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src11.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src11.csv
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src11.csv
[Fri Nov 25 00:32:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 00:32:50 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Nov 25 00:32:50 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Nov 25 00:32:50 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Nov 25 00:33:45 2011] Warning, spatial fit 11 centroid is now closest to src. 11
[Fri Nov 25 00:33:45 2011] Source 10 is offset by 1.390113 and -1.596856 pixels which is larger than
2 X fitted extent = 1.466501 x 1.466501, not incorporating fit results
[Fri Nov 25 00:33:45 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:45 2011] Assessing source extent using major
[Fri Nov 25 00:33:45 2011] Source does appear to be extended
[Fri Nov 25 00:33:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:33:45 2011] Source is confused with source 11
[Fri Nov 25 14:02:34 2011] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 14:02:34 2011] Initial guess for spatial extent in simple fitting = 7.89"
[Fri Nov 25 14:02:34 2011] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.560
[Fri Nov 25 14:02:34 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 7.89"
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src10.ximg exists
[Fri Nov 25 16:37:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src10.csv
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Nov 25 16:37:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src10.csv
[Fri Nov 25 16:37:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Nov 25 16:37:14 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Nov 25 16:37:43 2011] Source 10 is offset by -6.591726 and -1.173086 pixels which is larger than
2 X fitted extent = 0.880616 x 0.880616, not incorporating fit results
[Fri Nov 25 16:37:43 2011] Warning, spatial fit 10 centroid is now closest to src. 11
[Fri Nov 25 16:37:43 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:43 2011] Assessing source extent using major
[Fri Nov 25 16:37:43 2011] Source does appear to be extended
[Fri Nov 25 16:37:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 20:32:28 2011] XMMSAS src. selection expression = ellipse(26003.929840, 29433.351532, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing source region out to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src10_src.reg
[Mon Nov 28 20:32:28 2011] Extracting stamp from image fullrun_mos2_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (262, 301) - (337, 376)
[Mon Nov 28 20:32:28 2011] XMMSAS bgd. selection expression = annulus(26003.929840, 29433.351532, 1087.500000, 2175.000000, X, Y) && !ellipse(27350.455600, 27320.263200, 5585.592161, 5585.592161, 0.000000, X, Y) && !ellipse(28493.740000, 26667.064000, 3599.640104, 3599.640104, 0.000000, X, Y) && !ellipse(25657.828186, 28064.567108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.308000, 28582.360000, 1756.944051, 1756.944051, 0.000000, X, Y) && !ellipse(25453.349600, 29091.024000, 1278.376037, 1278.376037, 0.000000, X, Y) && !ellipse(26262.768646, 30247.094116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25127.054000, 31398.154600, 318.108009, 318.108009, 0.000000, X, Y) && !ellipse(26280.451141, 30127.808960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24264.561737, 27088.748260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25351.590000, 29379.698000, 1225.608035, 1225.608035, 0.000000, X, Y) && !ellipse(23660.409821, 27009.631042, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src10.gif
[Mon Nov 28 21:21:37 2011] Mean detx,y = (1832.05, 1755.54) 
[Mon Nov 28 21:21:39 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 21:21:55 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 21:21:56 2011] Setting source spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Nov 28 21:21:56 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Nov 29 00:26:17 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 00:26:17 2011] rmf not generated due to insufficient counts
[Tue Nov 29 02:21:47 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:47 2011] Error reading totcts from fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Nov 29 02:21:49 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:49 2011] Using photon index=1.80, rate=0.00947, arf fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src10.arf
[Tue Nov 29 02:21:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:50 2011] Updating source flux to 9.9e-14
[Tue Nov 29 02:27:28 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting