[Thu Nov 24 06:40:21 2011] Detection parameters:
  Position = (315.3, 314.1) = 4 33 38.10 -13 15 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30182.4 +/- 211.0
  Background counts = 947.5
  Rate = 0.4 +/- 0.003

[Thu Nov 24 06:40:22 2011] Off-axis axis estimate = 1.67'
[Thu Nov 24 16:54:22 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:54:22 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Nov 24 16:54:22 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Thu Nov 24 16:54:22 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Fri Nov 25 00:32:48 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src1.csv
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Nov 25 00:32:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src1.csv
[Fri Nov 25 00:32:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Nov 25 00:32:49 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Nov 25 00:32:49 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Nov 25 00:33:45 2011] Spatial fit model total counts = 80901.600000, observed total counts = 83490.000000
[Fri Nov 25 00:33:45 2011] Offset between fit and detection position for source 1 = 1.166442 pixels
[Fri Nov 25 00:33:45 2011] 78414.800000 total counts/ 25600.000000 bgd. counts: snr = 330.092500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.166442 pixels
  Position = (315.9, 313.2) = 4 33 37.92 -13 15 44.0
  Extent = 14.5 (14.5-29.1)", rotation angle = 0
  Source counts = 52814.8 +/- 280.0
  Background counts = 25600.0
  Rate = 0.7 +/- 0.004
[Fri Nov 25 00:33:45 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:45 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 00:33:45 2011] Source does appear to be extended
[Fri Nov 25 00:33:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:33:45 2011] Source is confused with source 2
[Fri Nov 25 14:02:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 14:02:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov 25 14:02:34 2011] Initial guess for spatial extent in simple fitting = 14.53"
[Fri Nov 25 14:02:34 2011] source mask rpix=3.3, npix_max = 58, mask sum = 50, frac = 0.848
[Fri Nov 25 14:02:34 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 14.53"
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Nov 25 16:37:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 16:37:13 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Nov 25 16:37:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 16:37:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Nov 25 16:37:14 2011] fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Nov 25 16:37:14 2011] Fit fullrun_mos2_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Nov 25 16:37:43 2011] Spatial fit model total counts = 151271.000000, observed total counts = 154147.000000
[Fri Nov 25 16:37:43 2011] Offset between fit and detection position for source 1 = 1.706983 pixels
[Fri Nov 25 16:37:43 2011] 150724.800000 total counts/ 72900.000000 bgd. counts: snr = 288.240000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.706983 pixels
  Position = (314.9, 314.6) = 4 33 38.20 -13 15 37.8
  Extent = 23.3 (23.1-23.5)", rotation angle = 0
  Source counts = 77824.8 +/- 388.2
  Background counts = 72900.0
  Rate = 1 +/- 0.005
[Fri Nov 25 16:37:43 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:43 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 16:37:43 2011] Source does appear to be extended
[Fri Nov 25 16:37:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 20:32:28 2011] Counts = 77824.800000, rescaling region sizes by 3.000000
[Mon Nov 28 20:32:28 2011] XMMSAS src. selection expression = ellipse(27350.455600, 27320.263200, 4189.194121, 4189.194121, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing source region out to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src1_src.reg
[Mon Nov 28 20:32:28 2011] Extracting stamp from image fullrun_mos2_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (74, 74) - (556, 555)
[Mon Nov 28 20:32:28 2011] XMMSAS bgd. selection expression = annulus(27350.455600, 27320.263200, 20945.970603, 41891.941205, X, Y) && !ellipse(28493.740000, 26667.064000, 3599.640104, 3599.640104, 0.000000, X, Y) && !ellipse(25657.828186, 28064.567108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.308000, 28582.360000, 1756.944051, 1756.944051, 0.000000, X, Y) && !ellipse(25453.349600, 29091.024000, 1278.376037, 1278.376037, 0.000000, X, Y) && !ellipse(26739.708000, 24253.574000, 1139.024033, 1139.024033, 0.000000, X, Y) && !ellipse(26262.768646, 30247.094116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25544.642260, 21047.139800, 238.811207, 238.811207, 0.000000, X, Y) && !ellipse(26003.929840, 29433.351532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36567.850677, 23002.076721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41641.273580, 34609.693600, 448.492013, 448.492013, 0.000000, X, Y) && !ellipse(25868.409180, 23968.560486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25896.863129, 21595.074478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28393.296000, 23490.532000, 1274.776037, 1274.776037, 0.000000, X, Y) && !ellipse(27650.220000, 23336.218000, 889.560026, 889.560026, 0.000000, X, Y) && !ellipse(26471.623200, 22886.364000, 1213.600035, 1213.600035, 0.000000, X, Y) && !ellipse(25127.054000, 31398.154600, 318.108009, 318.108009, 0.000000, X, Y) && !ellipse(35120.750854, 20731.750549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26280.451141, 30127.808960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27546.838000, 23067.972000, 1275.624037, 1275.624037, 0.000000, X, Y) && !ellipse(24264.561737, 27088.748260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29938.441650, 25872.325348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40346.575000, 33908.262400, 522.965615, 522.965615, 0.000000, X, Y) && !ellipse(30440.076000, 24786.428000, 1295.152037, 1295.152037, 0.000000, X, Y) && !ellipse(28112.017792, 22946.663605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25351.590000, 29379.698000, 1225.608035, 1225.608035, 0.000000, X, Y) && !ellipse(17946.249130, 19437.397217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29441.762665, 29060.797821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29689.901703, 24585.376892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23811.619049, 25281.926483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43312.395050, 23589.095734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23660.409821, 27009.631042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27468.616000, 22591.256000, 892.264026, 892.264026, 0.000000, X, Y)
[Mon Nov 28 20:32:28 2011] Writing fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src1.gif
[Mon Nov 28 20:33:19 2011] Mean detx,y = (82.14, -108.19) 
[Mon Nov 28 20:33:25 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 20:39:05 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 20:39:05 2011] Setting source spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Nov 28 20:39:05 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Nov 29 02:21:47 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:47 2011] Error reading totcts from fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Nov 29 02:21:49 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:49 2011] Using photon index=1.80, rate=1.02, arf fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src1.arf
[Tue Nov 29 02:21:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:49 2011] Updating source flux to 8.5e-12
[Tue Nov 29 02:27:28 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Nov 29 02:34:18 2011] Reading fit data from xmm0506260401/analysis//spectral/fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Nov 29 02:34:18 2011] Spectral fit parameter nH value = 1.45584e+21
[Tue Nov 29 02:34:18 2011] Spectral fit parameter PhoIndex value = 2.09558
[Tue Nov 29 02:34:18 2011] Failed to get F(0.3-8.0) from xmm0506260401/analysis//spectral/fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Nov 29 02:34:18 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:34:18 2011] Using Nh = 1.5e+21, photon index=2.10, rate=1.02, arf fullrun_mos2_xmm0506260401_pi300-10000_pass1_cl_src1.arf
[Tue Nov 29 02:34:18 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:34:19 2011] Updating source flux to 8.4e-12