[Thu Nov 24 06:39:55 2011] Detection parameters:
  Position = (309.4, 337.5) = 4 33 39.83 -13 14 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1526.7 +/- 76.4
  Background counts = 730.2
  Rate = 0.02 +/- 0.001

[Thu Nov 24 06:39:56 2011] Off-axis axis estimate = 2.94'
[Thu Nov 24 11:32:24 2011] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 11:32:24 2011] Initial guess for spatial extent in simple fitting = 7.90"
[Thu Nov 24 11:32:24 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.932
[Thu Nov 24 11:32:24 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 7.90"
[Thu Nov 24 16:54:21 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src6.ximg exists
[Thu Nov 24 16:54:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src6.csv
[Thu Nov 24 16:54:21 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Nov 24 16:54:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src6.csv
[Thu Nov 24 16:54:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:54:22 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Nov 24 16:54:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Nov 24 16:54:22 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Nov 24 16:54:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Nov 24 16:54:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 00:33:30 2011] Spatial fit model total counts = 13673.500000, observed total counts = 16607.000000
[Fri Nov 25 00:33:30 2011] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Nov 25 00:33:30 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:30 2011] Assessing source extent using major
[Fri Nov 25 00:33:30 2011] Source does appear to be extended
[Fri Nov 25 00:33:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 11:10:22 2011] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 11:10:22 2011] Initial guess for spatial extent in simple fitting = 7.90"
[Fri Nov 25 11:10:22 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.932
[Fri Nov 25 11:10:22 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 7.90"
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src6.ximg exists
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Nov 25 14:02:33 2011] Fit fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src6 appears to have run properly
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Nov 25 14:02:33 2011] Fit fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Nov 25 16:37:36 2011] Source 6 is offset by -1.265421 and 5.978767 pixels which is larger than
2 X fitted extent = 7.263403 x 2.305720, not incorporating fit results
[Fri Nov 25 16:37:36 2011] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.203036 pixels away
[Fri Nov 25 16:37:36 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:36 2011] Assessing source extent using major
[Fri Nov 25 16:37:36 2011] Source does appear to be extended
[Fri Nov 25 16:37:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 13:05:06 2011] Counts = 1526.708008, rescaling region sizes by 2.000000
[Mon Nov 28 13:05:07 2011] XMMSAS src. selection expression = ellipse(26871.744751, 29312.316711, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Nov 28 13:05:07 2011] Writing source region out to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src6_src.reg
[Mon Nov 28 13:05:07 2011] Extracting stamp from image fullrun_mos1_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (234, 262) - (384, 412)
[Mon Nov 28 13:05:07 2011] XMMSAS bgd. selection expression = annulus(26871.744751, 29312.316711, 4350.000000, 8700.000000, X, Y) && !ellipse(27381.784200, 27230.924800, 3493.632101, 3493.632101, 0.000000, X, Y) && !ellipse(27347.170227, 26445.219604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29375.400000, 27708.756000, 1334.704038, 1334.704038, 0.000000, X, Y) && !ellipse(27786.689087, 28732.407867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27517.021800, 27051.670000, 3391.032098, 3391.032098, 0.000000, X, Y) && !ellipse(25717.740400, 29623.746000, 1304.032038, 1304.032038, 0.000000, X, Y) && !ellipse(25609.639600, 21092.146800, 853.768025, 853.768025, 0.000000, X, Y) && !ellipse(29962.404731, 25790.518668, 1166.560034, 1165.262831, 359.668155, X, Y) && !ellipse(24194.686676, 27674.309662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26431.046000, 24278.468000, 2333.120067, 2333.120067, 0.000000, X, Y) && !ellipse(25805.564636, 24234.586456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28631.354797, 23706.323242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28114.319702, 23283.406281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27193.054200, 22422.222000, 1234.824036, 1234.824036, 0.000000, X, Y) && !ellipse(34626.615387, 35893.051086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30031.309265, 26837.638245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26072.464000, 23467.218000, 1166.560034, 1166.560034, 0.000000, X, Y) && !ellipse(27192.235992, 30470.902466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31101.584120, 31589.123000, 439.446413, 439.446413, 0.000000, X, Y) && !ellipse(25294.076000, 30125.990000, 1269.360037, 1269.360037, 0.000000, X, Y) && !ellipse(26045.284200, 30825.134400, 1337.968038, 1337.968038, 0.000000, X, Y)
[Mon Nov 28 13:05:07 2011] Writing fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src6.gif
[Mon Nov 28 14:06:06 2011] Mean detx,y = (1772.26, -1001.22) 
[Mon Nov 28 14:06:12 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 14:13:24 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 14:13:25 2011] Setting source spectrum file to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Nov 28 14:13:25 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Nov 28 17:32:14 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Nov 28 17:32:14 2011] rmf not generated due to insufficient counts
[Tue Nov 29 02:21:43 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:43 2011] Error reading totcts from fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Nov 29 02:21:45 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:45 2011] Using photon index=1.80, rate=0.0239, arf fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src6.arf
[Tue Nov 29 02:21:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:45 2011] Updating source flux to 2.3e-13
[Tue Nov 29 02:21:54 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting