[Thu Nov 24 06:39:55 2011] Detection parameters:
  Position = (301.4, 311.3) = 4 33 42.21 -13 15 52.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3989.7 +/- 91.7
  Background counts = 697.8
  Rate = 0.07 +/- 0.001

[Thu Nov 24 06:39:56 2011] Off-axis axis estimate = 0.96'
[Thu Nov 24 11:32:24 2011] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 11:32:24 2011] Initial guess for spatial extent in simple fitting = 6.91"
[Thu Nov 24 11:32:24 2011] source mask rpix=1.6, npix_max = 17, mask sum = 11, frac = 0.631
[Thu Nov 24 11:32:24 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 6.91"
[Thu Nov 24 16:54:21 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src5.ximg exists
[Thu Nov 24 16:54:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src5.csv
[Thu Nov 24 16:54:21 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Nov 24 16:54:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src5.csv
[Thu Nov 24 16:54:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:54:22 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Nov 24 16:54:22 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Nov 24 16:54:22 2011] Fit fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Nov 25 00:33:30 2011] Spatial fit model total counts = 27575.700000, observed total counts = 27951.000000
[Fri Nov 25 00:33:30 2011] Offset between fit and detection position for source 4 = 7.504713 pixels
[Fri Nov 25 00:33:30 2011] 28218.150000 total counts/ 25600.000000 bgd. counts: snr = 16.363437
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 7.504713 pixels
  Position = (307.4, 316.0) = 4 33 40.45 -13 15 31.8
  Extent = 13.8 (13.8-27.6)", rotation angle = 0
  Source counts = 2618.2 +/- 168.0
  Background counts = 25600.0
  Rate = 0.03 +/- 0.002
[Fri Nov 25 00:33:30 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:30 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 00:33:30 2011] Source does appear to be extended
[Fri Nov 25 00:33:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:33:30 2011] Source is confused with source 2
[Fri Nov 25 11:10:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 11:10:22 2011] Initial guess for spatial extent in simple fitting = 13.82"
[Fri Nov 25 11:10:22 2011] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.036
[Fri Nov 25 11:10:22 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 13.82"
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src5.ximg exists
[Fri Nov 25 14:02:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src5.csv
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Nov 25 14:02:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src5.csv
[Fri Nov 25 14:02:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Nov 25 14:02:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Nov 25 14:02:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Nov 25 14:02:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 16:37:36 2011] Spatial fit model total counts = 165607.000000, observed total counts = 167403.000000
[Fri Nov 25 16:37:36 2011] Offset between fit and detection position for source 4 = 9.559914 pixels
[Fri Nov 25 16:37:36 2011] Warning, changing simple spatial fit ID from 5 to 1
[Fri Nov 25 16:37:36 2011] 165000.700000 total counts/ 72900.000000 bgd. counts: snr = 341.113704
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 9.559914 pixels
  Position = (316.8, 314.6) = 4 33 37.64 -13 15 37.8
  Extent = 24.7 (24.6-25.0)", rotation angle = 0
  Source counts = 92100.7 +/- 406.2
  Background counts = 72900.0
  Rate = 1 +/- 0.005
[Fri Nov 25 16:37:36 2011] Spatial fit model total counts = 48289.900000, observed total counts = 51941.000000
[Fri Nov 25 16:37:36 2011] Offset between fit and detection position for source 4 = 3.076764 pixels
[Fri Nov 25 16:37:36 2011] Warning, changing simple spatial fit ID from 1 to 2
[Fri Nov 25 16:37:36 2011] 46059.500000 total counts/ 25600.000000 bgd. counts: snr = 127.871875
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 3.076764 pixels
  Position = (316.8, 311.5) = 4 33 37.63 -13 15 51.2
  Extent = 14.1 (14.1-28.3)", rotation angle = 0
  Source counts = 20459.5 +/- 214.6
  Background counts = 25600.0
  Rate = 0.3 +/- 0.003
[Fri Nov 25 16:37:36 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:36 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 16:37:36 2011] Source does appear to be extended
[Fri Nov 25 16:37:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 13:05:06 2011] Counts = 20459.500000, rescaling region sizes by 3.000000
[Mon Nov 28 13:05:06 2011] XMMSAS src. selection expression = ellipse(27517.021800, 27051.670000, 2543.274073, 2543.274073, 0.000000, X, Y)
[Mon Nov 28 13:05:06 2011] Writing source region out to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src4_src.reg
[Mon Nov 28 13:05:06 2011] Extracting stamp from image fullrun_mos1_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (171, 165) - (463, 458)
[Mon Nov 28 13:05:06 2011] XMMSAS bgd. selection expression = annulus(27517.021800, 27051.670000, 12716.370366, 25432.740732, X, Y) && !ellipse(27381.784200, 27230.924800, 3493.632101, 3493.632101, 0.000000, X, Y) && !ellipse(27347.170227, 26445.219604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29375.400000, 27708.756000, 1334.704038, 1334.704038, 0.000000, X, Y) && !ellipse(27786.689087, 28732.407867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26871.744751, 29312.316711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25717.740400, 29623.746000, 1304.032038, 1304.032038, 0.000000, X, Y) && !ellipse(25609.639600, 21092.146800, 853.768025, 853.768025, 0.000000, X, Y) && !ellipse(29962.404731, 25790.518668, 1166.560034, 1165.262831, 359.668155, X, Y) && !ellipse(24194.686676, 27674.309662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36536.173523, 23005.060974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26431.046000, 24278.468000, 2333.120067, 2333.120067, 0.000000, X, Y) && !ellipse(41674.353485, 34592.057526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25805.564636, 24234.586456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28631.354797, 23706.323242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28114.319702, 23283.406281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27193.054200, 22422.222000, 1234.824036, 1234.824036, 0.000000, X, Y) && !ellipse(34626.615387, 35893.051086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30031.309265, 26837.638245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40358.815674, 33946.556183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26072.464000, 23467.218000, 1166.560034, 1166.560034, 0.000000, X, Y) && !ellipse(27192.235992, 30470.902466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31101.584120, 31589.123000, 439.446413, 439.446413, 0.000000, X, Y) && !ellipse(17906.439621, 19416.729141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25294.076000, 30125.990000, 1269.360037, 1269.360037, 0.000000, X, Y) && !ellipse(26045.284200, 30825.134400, 1337.968038, 1337.968038, 0.000000, X, Y)
[Mon Nov 28 13:05:06 2011] Writing fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src4.gif
[Mon Nov 28 13:43:24 2011] Mean detx,y = (157.73, -141.06) 
[Mon Nov 28 13:43:32 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 14:05:27 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 14:05:28 2011] Setting source spectrum file to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Nov 28 14:05:28 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Nov 29 02:21:43 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:43 2011] Error reading totcts from fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Nov 29 02:21:45 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:45 2011] Using photon index=1.80, rate=0.267, arf fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src4.arf
[Tue Nov 29 02:21:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:45 2011] Updating source flux to 2.3e-12
[Tue Nov 29 02:21:54 2011] Flag c found in src. 4 procflags, skipping spectral fitting