[Thu Nov 24 06:39:55 2011] Detection parameters:
  Position = (344.9, 323.4) = 4 33 29.25 -13 14 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5480.1 +/- 466.5
  Background counts = 831.5
  Rate = 0.08 +/- 0.007

[Thu Nov 24 06:39:56 2011] Off-axis axis estimate = 3.83'
[Thu Nov 24 11:32:24 2011] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 11:32:24 2011] Initial guess for spatial extent in simple fitting = 8.34"
[Thu Nov 24 11:32:24 2011] source mask rpix=1.9, npix_max = 23, mask sum = 19, frac = 0.813
[Thu Nov 24 11:32:24 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 8.34"
[Thu Nov 24 16:54:21 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src3.ximg exists
[Thu Nov 24 16:54:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src3.csv
[Thu Nov 24 16:54:21 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Nov 24 16:54:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src3.csv
[Thu Nov 24 16:54:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:54:22 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Nov 24 16:54:22 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Nov 24 16:54:22 2011] Fit fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Nov 25 00:33:30 2011] Spatial fit model total counts = 9662.640000, observed total counts = 9660.000000
[Fri Nov 25 00:33:30 2011] Offset between fit and detection position for source 3 = 8.018825 pixels
[Fri Nov 25 00:33:30 2011] 9525.789000 total counts/ 8586.250000 bgd. counts: snr = 10.139418
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 8.018825 pixels
  Position = (338.2, 319.0) = 4 33 31.26 -13 15 18.3
  Extent = 16.7 (16.6-33.4)", rotation angle = 0
  Source counts = 939.5 +/- 97.6
  Background counts = 8586.2
  Rate = 0.01 +/- 0.001
[Fri Nov 25 00:33:30 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:30 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 00:33:30 2011] Source does appear to be extended
[Fri Nov 25 00:33:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 11:10:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 11:10:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov 25 11:10:22 2011] Initial guess for spatial extent in simple fitting = 16.68"
[Fri Nov 25 11:10:22 2011] source mask rpix=3.8, npix_max = 75, mask sum = 72, frac = 0.958
[Fri Nov 25 11:10:22 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 16.68"
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src3.ximg exists
[Fri Nov 25 14:02:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src3.csv
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Nov 25 14:02:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src3.csv
[Fri Nov 25 14:02:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Nov 25 14:02:33 2011] Fit fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Nov 25 16:37:36 2011] Warning, spatial fit 3 centroid is now closest to src. 1
[Fri Nov 25 16:37:36 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:36 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 16:37:36 2011] Source does appear to be extended
[Fri Nov 25 16:37:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 13:05:06 2011] XMMSAS src. selection expression = ellipse(29375.400000, 27708.756000, 1001.028029, 1001.028029, 0.000000, X, Y)
[Mon Nov 28 13:05:06 2011] Writing source region out to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src3_src.reg
[Mon Nov 28 13:05:06 2011] Extracting stamp from image fullrun_mos1_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (281, 262) - (396, 377)
[Mon Nov 28 13:05:06 2011] XMMSAS bgd. selection expression = annulus(29375.400000, 27708.756000, 1668.380048, 3336.760096, X, Y) && !ellipse(27381.784200, 27230.924800, 3493.632101, 3493.632101, 0.000000, X, Y) && !ellipse(27347.170227, 26445.219604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27786.689087, 28732.407867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27517.021800, 27051.670000, 3391.032098, 3391.032098, 0.000000, X, Y) && !ellipse(26871.744751, 29312.316711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25717.740400, 29623.746000, 1304.032038, 1304.032038, 0.000000, X, Y) && !ellipse(29962.404731, 25790.518668, 1166.560034, 1165.262831, 359.668155, X, Y) && !ellipse(26431.046000, 24278.468000, 2333.120067, 2333.120067, 0.000000, X, Y) && !ellipse(25805.564636, 24234.586456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28631.354797, 23706.323242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30031.309265, 26837.638245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26072.464000, 23467.218000, 1166.560034, 1166.560034, 0.000000, X, Y) && !ellipse(27192.235992, 30470.902466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25294.076000, 30125.990000, 1269.360037, 1269.360037, 0.000000, X, Y) && !ellipse(26045.284200, 30825.134400, 1337.968038, 1337.968038, 0.000000, X, Y)
[Mon Nov 28 13:05:06 2011] Writing fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src3.gif
[Mon Nov 28 13:36:14 2011] Mean detx,y = (987.05, 1404.68) 
[Mon Nov 28 13:36:18 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 13:36:42 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 13:36:43 2011] Setting source spectrum file to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Nov 28 13:36:43 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Nov 29 02:21:43 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:43 2011] Error reading totcts from fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Nov 29 02:21:45 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:45 2011] Using photon index=1.80, rate=0.0123, arf fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src3.arf
[Tue Nov 29 02:21:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:45 2011] Updating source flux to 1.2e-13