[Thu Nov 24 06:39:55 2011] Detection parameters:
  Position = (479.6, 398.2) = 4 32 49.16 -13 9 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 645.6 +/- 33.4
  Background counts = 63.0
  Rate = 0.008 +/- 0.0004

[Thu Nov 24 06:39:56 2011] Off-axis axis estimate = 14.99'
[Thu Nov 24 11:32:24 2011] Using EEF radius (= 13.92 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 11:32:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 11:32:24 2011] Initial guess for spatial extent in simple fitting = 13.92"
[Thu Nov 24 11:32:24 2011] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.022
[Thu Nov 24 11:32:24 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 13.92"
[Thu Nov 24 16:54:21 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src16.ximg exists
[Thu Nov 24 16:54:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src16.csv
[Thu Nov 24 16:54:21 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src16_1.ximg exists
[Thu Nov 24 16:54:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src16.csv
[Thu Nov 24 16:54:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:54:22 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Thu Nov 24 16:54:22 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Thu Nov 24 16:54:22 2011] Fit fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Nov 25 00:33:30 2011] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 18.318011 pixels away
[Fri Nov 25 00:33:30 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:30 2011] Assessing source extent using major
[Fri Nov 25 00:33:30 2011] Source does appear to be extended
[Fri Nov 25 00:33:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 11:10:22 2011] Using EEF radius (= 13.92 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 11:10:22 2011] Initial guess for spatial extent in simple fitting = 13.92"
[Fri Nov 25 11:10:22 2011] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.022
[Fri Nov 25 11:10:22 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 13.92"
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src13.ximg exists
[Fri Nov 25 14:02:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src13.csv
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Nov 25 14:02:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src13.csv
[Fri Nov 25 14:02:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 14:02:34 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Nov 25 14:02:34 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Nov 25 14:02:34 2011] Fit fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Nov 25 16:37:36 2011] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 18.318011 pixels away
[Fri Nov 25 16:37:36 2011] Source 24 is offset by 3.330454 and 6.181052 pixels which is larger than
2 X fitted extent = 1.559205 x 1.559205, not incorporating fit results
[Fri Nov 25 16:37:36 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:36 2011] Assessing source extent using major
[Fri Nov 25 16:37:36 2011] Source does appear to be extended
[Fri Nov 25 16:37:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 13:05:07 2011] XMMSAS src. selection expression = ellipse(41674.353485, 34592.057526, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 13:05:07 2011] Writing source region out to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src24_src.reg
[Mon Nov 28 13:05:07 2011] Extracting stamp from image fullrun_mos1_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (442, 361) - (517, 436)
[Mon Nov 28 13:05:07 2011] XMMSAS bgd. selection expression = annulus(41674.353485, 34592.057526, 1087.500000, 2175.000000, X, Y) && !ellipse(40358.815674, 33946.556183, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 13:05:07 2011] Writing fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src24.gif
[Mon Nov 28 14:39:08 2011] Mean detx,y = (10505.43, 12084.97) 
[Mon Nov 28 14:39:10 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 14:39:43 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 14:39:44 2011] Setting source spectrum file to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Nov 28 14:39:44 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Mon Nov 28 19:55:19 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Nov 28 19:55:19 2011] rmf not generated due to insufficient counts
[Tue Nov 29 02:21:44 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:44 2011] Error reading totcts from fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue Nov 29 02:21:46 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:46 2011] Using photon index=1.80, rate=0.00821, arf fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src24.arf
[Tue Nov 29 02:21:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:46 2011] Updating source flux to 1.9e-13
[Tue Nov 29 02:21:54 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting