[Thu Nov 24 06:39:55 2011] Detection parameters:
  Position = (294.7, 243.1) = 4 33 44.21 -13 20 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 382.6 +/- 27.4
  Background counts = 235.6
  Rate = 0.009 +/- 0.0006

[Thu Nov 24 06:39:56 2011] Off-axis axis estimate = 4.02'
[Thu Nov 24 11:32:24 2011] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 11:32:24 2011] Initial guess for spatial extent in simple fitting = 8.44"
[Thu Nov 24 11:32:24 2011] source mask rpix=1.9, npix_max = 23, mask sum = 14, frac = 0.588
[Thu Nov 24 11:32:24 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 8.44"
[Thu Nov 24 16:54:21 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src10.ximg exists
[Thu Nov 24 16:54:21 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src10.csv
[Thu Nov 24 16:54:21 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Nov 24 16:54:21 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src10.csv
[Thu Nov 24 16:54:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:54:22 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Nov 24 16:54:22 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Nov 24 16:54:22 2011] Fit fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Nov 25 00:33:30 2011] Source 23 is offset by -5.326322 and -6.171231 pixels which is larger than
2 X fitted extent = 0.970189 x 0.970189, not incorporating fit results
[Fri Nov 25 00:33:30 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:30 2011] Assessing source extent using major
[Fri Nov 25 00:33:30 2011] Source does appear to be extended
[Fri Nov 25 00:33:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 11:10:22 2011] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 11:10:22 2011] Initial guess for spatial extent in simple fitting = 8.44"
[Fri Nov 25 11:10:22 2011] source mask rpix=1.9, npix_max = 23, mask sum = 14, frac = 0.588
[Fri Nov 25 11:10:22 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 8.44"
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src8.ximg exists
[Fri Nov 25 14:02:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src8.csv
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Nov 25 14:02:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src8.csv
[Fri Nov 25 14:02:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Nov 25 14:02:33 2011] Fit fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Nov 25 16:37:36 2011] Spatial fit model total counts = 1838.170000, observed total counts = 1916.000000
[Fri Nov 25 16:37:36 2011] Offset between fit and detection position for source 23 = 0.197807 pixels
[Fri Nov 25 16:37:36 2011] 2002.169000 total counts/ 1542.130000 bgd. counts: snr = 11.714781
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.197807 pixels
  Position = (294.9, 243.0) = 4 33 44.16 -13 20 49.2
  Extent = 10.7 (9.2-12.4)", rotation angle = 0
  Source counts = 460.0 +/- 44.7
  Background counts = 1542.1
  Rate = 0.006 +/- 0.0006
[Fri Nov 25 16:37:36 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:36 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 16:37:36 2011] Source does appear to be extended
[Fri Nov 25 16:37:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 13:05:07 2011] XMMSAS src. selection expression = ellipse(25609.639600, 21092.146800, 640.326018, 640.326018, 0.000000, X, Y)
[Mon Nov 28 13:05:07 2011] Writing source region out to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src23_src.reg
[Mon Nov 28 13:05:07 2011] Extracting stamp from image fullrun_mos1_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (258, 206) - (332, 280)
[Mon Nov 28 13:05:07 2011] XMMSAS bgd. selection expression = annulus(25609.639600, 21092.146800, 1067.210031, 2134.420061, X, Y) && !ellipse(26431.046000, 24278.468000, 2333.120067, 2333.120067, 0.000000, X, Y) && !ellipse(28114.319702, 23283.406281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27193.054200, 22422.222000, 1234.824036, 1234.824036, 0.000000, X, Y) && !ellipse(26072.464000, 23467.218000, 1166.560034, 1166.560034, 0.000000, X, Y)
[Mon Nov 28 13:05:07 2011] Writing fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src23.gif
[Mon Nov 28 14:14:35 2011] Mean detx,y = (-6048.36, -609.08) 
[Mon Nov 28 14:14:39 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 14:15:17 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 14:15:18 2011] Setting source spectrum file to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Nov 28 14:15:18 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Tue Nov 29 02:21:44 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:44 2011] Error reading totcts from fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Tue Nov 29 02:21:45 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:45 2011] Using photon index=1.80, rate=0.006, arf fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src23.arf
[Tue Nov 29 02:21:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:45 2011] Updating source flux to 8.1e-14
[Tue Nov 29 02:21:54 2011] Flag b found in src. 23 procflags, skipping spectral fitting