[Thu Nov 24 06:39:55 2011] Detection parameters:
  Position = (420.5, 265.0) = 4 33 6.73 -13 19 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 381.2 +/- 28.3
  Background counts = 104.8
  Rate = 0.008 +/- 0.0006

[Thu Nov 24 06:39:56 2011] Off-axis axis estimate = 9.18'
[Thu Nov 24 11:32:24 2011] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 11:32:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 11:32:24 2011] Initial guess for spatial extent in simple fitting = 11.02"
[Thu Nov 24 11:32:24 2011] source mask rpix=2.5, npix_max = 36, mask sum = 40, frac = 1.087
[Thu Nov 24 11:32:24 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 11.02"
[Thu Nov 24 16:54:21 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src14.ximg exists
[Thu Nov 24 16:54:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src14.csv
[Thu Nov 24 16:54:21 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu Nov 24 16:54:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src14.csv
[Thu Nov 24 16:54:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:54:22 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu Nov 24 16:54:22 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Nov 24 16:54:22 2011] Fit fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Nov 25 00:33:30 2011] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 13.443596 pixels away
[Fri Nov 25 00:33:30 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:30 2011] Assessing source extent using major
[Fri Nov 25 00:33:30 2011] Source does appear to be extended
[Fri Nov 25 00:33:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 11:10:22 2011] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 11:10:22 2011] Initial guess for spatial extent in simple fitting = 11.02"
[Fri Nov 25 11:10:22 2011] source mask rpix=2.5, npix_max = 36, mask sum = 40, frac = 1.087
[Fri Nov 25 11:10:22 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 11.02"
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src11.ximg exists
[Fri Nov 25 14:02:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src11.csv
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Nov 25 14:02:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src11.csv
[Fri Nov 25 14:02:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 14:02:34 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Nov 25 14:02:34 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Nov 25 14:02:34 2011] Fit fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Nov 25 16:37:36 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 13.583264 pixels away
[Fri Nov 25 16:37:36 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:36 2011] Assessing source extent using major
[Fri Nov 25 16:37:36 2011] Source does appear to be extended
[Fri Nov 25 16:37:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 13:05:07 2011] XMMSAS src. selection expression = ellipse(36536.173523, 23005.060974, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 13:05:07 2011] Writing source region out to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src20_src.reg
[Mon Nov 28 13:05:07 2011] Extracting stamp from image fullrun_mos1_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (383, 227) - (458, 302)
[Mon Nov 28 13:05:07 2011] XMMSAS bgd. selection expression = annulus(36536.173523, 23005.060974, 1087.500000, 2175.000000, X, Y)
[Mon Nov 28 13:05:07 2011] Writing fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src20.gif
[Mon Nov 28 14:17:21 2011] Mean detx,y = (-1930.46, 9608.09) 
[Mon Nov 28 14:17:24 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 14:17:48 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 14:17:49 2011] Setting source spectrum file to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Nov 28 14:17:49 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Nov 28 18:04:50 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Nov 28 18:04:50 2011] rmf not generated due to insufficient counts
[Tue Nov 29 02:21:44 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:44 2011] Error reading totcts from fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Nov 29 02:21:46 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:46 2011] Using photon index=1.80, rate=0.00831, arf fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src20.arf
[Tue Nov 29 02:21:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:46 2011] Updating source flux to 1.2e-13
[Tue Nov 29 02:21:54 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting