[Thu Nov 24 06:39:55 2011] Detection parameters:
  Position = (316.0, 314.0) = 4 33 37.89 -13 15 40.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30727.5 +/- 222.0
  Background counts = 948.8
  Rate = 0.4 +/- 0.003

[Thu Nov 24 06:39:56 2011] Off-axis axis estimate = 1.70'
[Thu Nov 24 11:32:24 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 11:32:24 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Nov 24 11:32:24 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Thu Nov 24 11:32:24 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Thu Nov 24 16:54:21 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Nov 24 16:54:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 16:54:21 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Nov 24 16:54:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 16:54:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:54:22 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Nov 24 16:54:22 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Nov 24 16:54:22 2011] Fit fullrun_mos1_xmm0506260401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Nov 25 00:33:30 2011] Spatial fit model total counts = 83889.400000, observed total counts = 91115.000000
[Fri Nov 25 00:33:30 2011] Offset between fit and detection position for source 2 = 0.810133 pixels
[Fri Nov 25 00:33:30 2011] 85077.100000 total counts/ 25600.000000 bgd. counts: snr = 371.731875
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.810133 pixels
  Position = (315.3, 313.6) = 4 33 38.09 -13 15 42.2
  Extent = 14.6 (14.6-29.1)", rotation angle = 0
  Source counts = 59477.1 +/- 291.7
  Background counts = 25600.0
  Rate = 0.8 +/- 0.004
[Fri Nov 25 00:33:30 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 00:33:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 00:33:30 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 00:33:30 2011] Source does appear to be extended
[Fri Nov 25 00:33:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 00:33:30 2011] Source is confused with source 1
[Fri Nov 25 00:33:30 2011] Source is confused with source 4
[Fri Nov 25 11:10:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 11:10:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov 25 11:10:22 2011] Initial guess for spatial extent in simple fitting = 14.56"
[Fri Nov 25 11:10:22 2011] source mask rpix=3.3, npix_max = 59, mask sum = 55, frac = 0.929
[Fri Nov 25 11:10:22 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 14.56"
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Nov 25 14:02:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Nov 25 14:02:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 14:02:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Nov 25 14:02:33 2011] fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Nov 25 14:02:33 2011] Fit fullrun_mos1_xmm0506260401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Nov 25 16:37:36 2011] Warning, spatial fit 1 centroid is now closest to src. 4
[Fri Nov 25 16:37:36 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:37:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:37:36 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 16:37:36 2011] Source does appear to be extended
[Fri Nov 25 16:37:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 13:05:06 2011] Counts = 59477.100000, rescaling region sizes by 3.000000
[Mon Nov 28 13:05:06 2011] XMMSAS src. selection expression = ellipse(27381.784200, 27230.924800, 2620.224075, 2620.224075, 0.000000, X, Y)
[Mon Nov 28 13:05:06 2011] Writing source region out to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src2_src.reg
[Mon Nov 28 13:05:06 2011] Extracting stamp from image fullrun_mos1_xmm0506260401_pi300-10000_cl_sm2.00.img.gz, (165, 163) - (466, 464)
[Mon Nov 28 13:05:06 2011] XMMSAS bgd. selection expression = annulus(27381.784200, 27230.924800, 13101.120377, 26202.240754, X, Y) && !ellipse(27347.170227, 26445.219604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29375.400000, 27708.756000, 1334.704038, 1334.704038, 0.000000, X, Y) && !ellipse(27786.689087, 28732.407867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27517.021800, 27051.670000, 3391.032098, 3391.032098, 0.000000, X, Y) && !ellipse(26871.744751, 29312.316711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25717.740400, 29623.746000, 1304.032038, 1304.032038, 0.000000, X, Y) && !ellipse(25609.639600, 21092.146800, 853.768025, 853.768025, 0.000000, X, Y) && !ellipse(29962.404731, 25790.518668, 1166.560034, 1165.262831, 359.668155, X, Y) && !ellipse(24194.686676, 27674.309662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36536.173523, 23005.060974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26431.046000, 24278.468000, 2333.120067, 2333.120067, 0.000000, X, Y) && !ellipse(41674.353485, 34592.057526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25805.564636, 24234.586456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28631.354797, 23706.323242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28114.319702, 23283.406281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27193.054200, 22422.222000, 1234.824036, 1234.824036, 0.000000, X, Y) && !ellipse(34626.615387, 35893.051086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30031.309265, 26837.638245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40358.815674, 33946.556183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26072.464000, 23467.218000, 1166.560034, 1166.560034, 0.000000, X, Y) && !ellipse(27192.235992, 30470.902466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31101.584120, 31589.123000, 439.446413, 439.446413, 0.000000, X, Y) && !ellipse(17906.439621, 19416.729141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25294.076000, 30125.990000, 1269.360037, 1269.360037, 0.000000, X, Y) && !ellipse(26045.284200, 30825.134400, 1337.968038, 1337.968038, 0.000000, X, Y)
[Mon Nov 28 13:05:06 2011] Writing fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src2.gif
[Mon Nov 28 13:06:10 2011] Mean detx,y = (214.10, -205.25) 
[Mon Nov 28 13:06:19 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 13:28:09 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 13:28:10 2011] Setting source spectrum file to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Nov 28 13:28:10 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Nov 29 02:21:43 2011] Updating aperture counts using extracted products
[Tue Nov 29 02:21:43 2011] Error reading totcts from fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Nov 29 02:21:45 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:21:45 2011] Using photon index=1.80, rate=0.776, arf fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src2.arf
[Tue Nov 29 02:21:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:21:45 2011] Updating source flux to 6.7e-12
[Tue Nov 29 02:21:54 2011] Flag c found in src. 2 procflags, skipping spectral fitting
[Tue Nov 29 02:27:28 2011] Reading fit data from xmm0506260401/analysis//spectral/fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src2_pl.csv
[Tue Nov 29 02:27:28 2011] Spectral fit parameter nH value = 1.58615e+21
[Tue Nov 29 02:27:28 2011] Spectral fit parameter PhoIndex value = 2.24495
[Tue Nov 29 02:27:28 2011] Failed to get F(0.3-8.0) from xmm0506260401/analysis//spectral/fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Nov 29 02:27:28 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 02:27:28 2011] Using Nh = 1.6e+21, photon index=2.24, rate=0.776, arf fullrun_mos1_xmm0506260401_pi300-10000_pass1_cl_src2.arf
[Tue Nov 29 02:27:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 02:27:28 2011] Updating source flux to 6.2e-12