[Wed May 23 19:54:44 2012] Detection parameters:
  Position = (265.5, 273.6) = 4 33 42.18 -13 16 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4333.5 +/- 98.5
  Background counts = 2656.0
  Rate = 0.1 +/- 0.002

[Wed May 23 19:54:47 2012] Off-axis axis estimate = 2.99'
[Wed May 23 20:04:59 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:04:59 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Wed May 23 20:04:59 2012] source mask rpix=1.8, npix_max = 21, mask sum = 22, frac = 1.020
[Wed May 23 20:04:59 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.92"
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src6.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src6.csv
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src6.csv
[Thu May 24 08:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 08:16:35 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu May 24 08:16:35 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu May 24 08:16:35 2012] Fit fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly