[Wed May 23 19:54:47 2012] Detection parameters:
  Position = (352.2, 167.5) = 4 33 16.32 -13 24 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.7 +/- 24.0
  Background counts = 171.0
  Rate = 0.003 +/- 0.0004

[Wed May 23 19:54:47 2012] Off-axis axis estimate = 10.27'
[Wed May 23 20:04:59 2012] Using EEF radius (= 11.56 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:04:59 2012] Initial guess for spatial extent in simple fitting = 11.56"
[Wed May 23 20:04:59 2012] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.053
[Wed May 23 20:04:59 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 11.56"
[Thu May 24 08:16:35 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src74.ximg exists
[Thu May 24 08:16:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src74.csv
[Thu May 24 08:16:35 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src74_1.ximg exists
[Thu May 24 08:16:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src74.csv
[Thu May 24 08:16:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 08:16:37 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Thu May 24 08:16:37 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Thu May 24 08:16:37 2012] Fit fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src74 appears to have run properly