[Wed May 23 19:54:47 2012] Detection parameters:
  Position = (263.8, 218.8) = 4 33 42.69 -13 20 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 386.4 +/- 41.3
  Background counts = 685.3
  Rate = 0.01 +/- 0.001

[Wed May 23 19:54:47 2012] Off-axis axis estimate = 6.30'
[Wed May 23 20:04:59 2012] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:04:59 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Wed May 23 20:04:59 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.028
[Wed May 23 20:04:59 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 9.58"
[Thu May 24 08:16:35 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src66.ximg exists
[Thu May 24 08:16:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src66.csv
[Thu May 24 08:16:35 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src66_1.ximg exists
[Thu May 24 08:16:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src66.csv
[Thu May 24 08:16:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 08:16:37 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Thu May 24 08:16:37 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Thu May 24 08:16:37 2012] Fit fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src66 appears to have run properly