[Wed May 23 19:54:46 2012] Detection parameters:
  Position = (296.8, 332.3) = 4 33 32.84 -13 12 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 288.5 +/- 51.7
  Background counts = 1384.5
  Rate = 0.006 +/- 0.001

[Wed May 23 19:54:47 2012] Off-axis axis estimate = 2.46'
[Wed May 23 20:04:59 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:04:59 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Wed May 23 20:04:59 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.978
[Wed May 23 20:04:59 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 7.66"
[Thu May 24 08:16:35 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src43.ximg exists
[Thu May 24 08:16:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src43.csv
[Thu May 24 08:16:35 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src43_1.ximg exists
[Thu May 24 08:16:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src43.csv
[Thu May 24 08:16:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 08:16:36 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Thu May 24 08:16:36 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Thu May 24 08:16:36 2012] Fit fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly