[Wed May 23 19:54:46 2012] Detection parameters:
  Position = (154.9, 354.0) = 4 34 15.11 -13 10 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 174.1 +/- 23.9
  Background counts = 162.8
  Rate = 0.003 +/- 0.0004

[Wed May 23 19:54:47 2012] Off-axis axis estimate = 11.16'
[Wed May 23 20:04:59 2012] Using EEF radius (= 12.01 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:04:59 2012] Initial guess for spatial extent in simple fitting = 12.01"
[Wed May 23 20:04:59 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.847
[Wed May 23 20:04:59 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 12.01"
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src40.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src40.csv
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src40_1.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src40.csv
[Thu May 24 08:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 08:16:36 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Thu May 24 08:16:36 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Thu May 24 08:16:36 2012] Fit fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly