[Wed May 23 19:54:46 2012] Detection parameters:
  Position = (281.3, 354.5) = 4 33 37.45 -13 10 34.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 390.4 +/- 43.9
  Background counts = 876.6
  Rate = 0.009 +/- 0.001

[Wed May 23 19:54:47 2012] Off-axis axis estimate = 4.25'
[Wed May 23 20:04:59 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:04:59 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Wed May 23 20:04:59 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.028
[Wed May 23 20:04:59 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 8.55"
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src39.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src39.csv
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src39_1.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src39.csv
[Thu May 24 08:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 08:16:36 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Thu May 24 08:16:36 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Thu May 24 08:16:36 2012] Fit fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly