[Wed May 23 19:54:45 2012] Detection parameters:
  Position = (315.1, 391.0) = 4 33 27.38 -13 7 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 221.2 +/- 32.5
  Background counts = 408.7
  Rate = 0.007 +/- 0.001

[Wed May 23 19:54:47 2012] Off-axis axis estimate = 6.82'
[Wed May 23 20:04:59 2012] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:04:59 2012] Initial guess for spatial extent in simple fitting = 9.84"
[Wed May 23 20:04:59 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.180
[Wed May 23 20:04:59 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.84"
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src27.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src27.csv
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src27.csv
[Thu May 24 08:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 08:16:36 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu May 24 08:16:36 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu May 24 08:16:36 2012] Fit fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly