[Wed May 23 19:54:45 2012] Detection parameters:
  Position = (321.5, 402.9) = 4 33 25.51 -13 7 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 279.6 +/- 33.4
  Background counts = 341.0
  Rate = 0.005 +/- 0.0006

[Wed May 23 19:54:47 2012] Off-axis axis estimate = 7.76'
[Wed May 23 20:04:59 2012] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:04:59 2012] Initial guess for spatial extent in simple fitting = 10.31"
[Wed May 23 20:04:59 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.911
[Wed May 23 20:04:59 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 10.31"
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src24.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src24.csv
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src24_1.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src24.csv
[Thu May 24 08:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 08:16:36 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Thu May 24 08:16:36 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Thu May 24 08:16:36 2012] Fit fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly