[Wed May 23 19:54:45 2012] Detection parameters:
  Position = (326.3, 410.9) = 4 33 24.06 -13 6 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.4 +/- 31.2
  Background counts = 304.7
  Rate = 0.004 +/- 0.0005

[Wed May 23 19:54:47 2012] Off-axis axis estimate = 8.40'
[Wed May 23 20:04:59 2012] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:04:59 2012] Initial guess for spatial extent in simple fitting = 10.63"
[Wed May 23 20:04:59 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.039
[Wed May 23 20:04:59 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 10.63"
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src22.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src22.csv
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src22.csv
[Thu May 24 08:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 08:16:36 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu May 24 08:16:36 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu May 24 08:16:36 2012] Fit fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly