[Wed May 23 19:54:45 2012] Detection parameters:
  Position = (314.2, 410.7) = 4 33 27.68 -13 6 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.1 +/- 27.5
  Background counts = 309.4
  Rate = 0.002 +/- 0.0005

[Wed May 23 19:54:47 2012] Off-axis axis estimate = 8.22'
[Wed May 23 20:04:59 2012] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:04:59 2012] Initial guess for spatial extent in simple fitting = 10.54"
[Wed May 23 20:04:59 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.054
[Wed May 23 20:04:59 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 10.54"
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src21.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src21.csv
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src21.csv
[Thu May 24 08:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 08:16:36 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu May 24 08:16:36 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu May 24 08:16:36 2012] Fit fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly