[Wed May 23 19:54:45 2012] Detection parameters:
  Position = (331.5, 435.0) = 4 33 22.52 -13 4 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 256.1 +/- 30.8
  Background counts = 236.8
  Rate = 0.004 +/- 0.0005

[Wed May 23 19:54:47 2012] Off-axis axis estimate = 10.18'
[Wed May 23 20:04:59 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:04:59 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Wed May 23 20:04:59 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.059
[Wed May 23 20:04:59 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 11.52"
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src16.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src16.csv
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src16_1.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src16.csv
[Thu May 24 08:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 08:16:35 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Thu May 24 08:16:36 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Thu May 24 08:16:36 2012] Fit fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly