[Wed May 23 19:54:44 2012] Detection parameters:
  Position = (443.5, 368.2) = 4 32 49.15 -13 9 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1490.3 +/- 49.3
  Background counts = 127.7
  Rate = 0.02 +/- 0.0008

[Wed May 23 19:54:47 2012] Off-axis axis estimate = 11.67'
[Wed May 23 20:04:59 2012] Using EEF radius (= 12.26 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:04:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 23 20:04:59 2012] Initial guess for spatial extent in simple fitting = 12.26"
[Wed May 23 20:04:59 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.953
[Wed May 23 20:04:59 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.26"
[Thu May 24 08:16:33 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 24 08:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src2.csv
[Thu May 24 08:16:33 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src2.csv
[Thu May 24 08:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 08:16:35 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 24 08:16:35 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 24 08:16:35 2012] Fit fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly