[Wed May 23 19:54:45 2012] Detection parameters:
  Position = (334.2, 441.2) = 4 33 21.72 -13 4 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 182.0 +/- 22.7
  Background counts = 214.6
  Rate = 0.003 +/- 0.0004

[Wed May 23 19:54:47 2012] Off-axis axis estimate = 10.67'
[Wed May 23 20:04:59 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:04:59 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Wed May 23 20:04:59 2012] source mask rpix=2.7, npix_max = 41, mask sum = 34, frac = 0.828
[Wed May 23 20:04:59 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 11.76"
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src14.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src14.csv
[Thu May 24 08:16:34 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu May 24 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src14.csv
[Thu May 24 08:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 08:16:35 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu May 24 08:16:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Thu May 24 08:16:35 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu May 24 08:16:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Thu May 24 08:16:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes