[Wed May 23 19:54:44 2012] Detection parameters:
  Position = (279.9, 284.0) = 4 33 37.88 -13 15 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67124.2 +/- 324.7
  Background counts = 3014.3
  Rate = 1 +/- 0.006

[Wed May 23 19:54:47 2012] Off-axis axis estimate = 1.70'
[Wed May 23 20:04:59 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed May 23 20:04:59 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed May 23 20:04:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Wed May 23 20:04:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Thu May 24 08:16:33 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 24 08:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src1.csv
[Thu May 24 08:16:33 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 24 08:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src1.csv
[Thu May 24 08:16:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 08:16:35 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 24 08:16:35 2012] fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 24 08:16:35 2012] Fit fullrun_pn_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly