[Wed May 23 19:55:23 2012] Detection parameters:
  Position = (461.2, 310.2) = 4 32 43.87 -13 13 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.6 +/- 13.8
  Background counts = 30.2
  Rate = 0.001 +/- 0.0002

[Wed May 23 19:55:24 2012] Off-axis axis estimate = 11.83'
[Thu May 24 08:16:37 2012] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Thu May 24 08:16:37 2012] Initial guess for spatial extent in simple fitting = 12.34"
[Thu May 24 08:16:37 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.100
[Thu May 24 08:16:37 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 12.34"
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src35.ximg exists
[Thu May 24 13:23:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src35.csv
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src35_1.ximg exists
[Thu May 24 13:23:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src35.csv
[Thu May 24 13:23:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 13:23:25 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Thu May 24 13:23:25 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Thu May 24 13:23:25 2012] Fit fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly